This is the latest recevied telemetry packets stored in our database for station/object SQ1BHQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781843174 | 366 Count | 537 Count | 305 Count | 3.16 VDC | 0.08 VDC |
| 1781841415 | 365 Count | 537 Count | 305 Count | 3.33 VDC | 0.08 VDC |
| 1781839611 | 364 Count | 537 Count | 305 Count | 3.36 VDC | 0.08 VDC |
| 1781837807 | 363 Count | 537 Count | 305 Count | 3.39 VDC | 0.08 VDC |
| 1781836003 | 362 Count | 537 Count | 305 Count | 3.42 VDC | 0.08 VDC |
| 1781834200 | 361 Count | 537 Count | 305 Count | 3.45 VDC | 0.08 VDC |
| 1781832396 | 360 Count | 537 Count | 305 Count | 3.47 VDC | 0.08 VDC |
| 1781830592 | 359 Count | 537 Count | 305 Count | 3.5 VDC | 0.08 VDC |
| 1781828788 | 358 Count | 537 Count | 305 Count | 3.53 VDC | 0.08 VDC |
| 1781826985 | 357 Count | 537 Count | 305 Count | 3.55 VDC | 0.08 VDC |
| 1781825181 | 356 Count | 537 Count | 305 Count | 3.59 VDC | 0.08 VDC |
| 1781823377 | 355 Count | 537 Count | 305 Count | 3.62 VDC | 0.08 VDC |
| 1781821573 | 354 Count | 537 Count | 305 Count | 3.66 VDC | 0.08 VDC |
| 1781819815 | 353 Count | 537 Count | 305 Count | 3.68 VDC | 0.08 VDC |
| 1781818011 | 352 Count | 537 Count | 305 Count | 3.7 VDC | 0.08 VDC |
| 1781816207 | 351 Count | 537 Count | 305 Count | 3.72 VDC | 0.08 VDC |
| 1781814403 | 350 Count | 537 Count | 305 Count | 3.73 VDC | 0.08 VDC |
| 1781812599 | 349 Count | 537 Count | 305 Count | 3.75 VDC | 0.08 VDC |
| 1781808992 | 347 Count | 537 Count | 305 Count | 3.8 VDC | 0.08 VDC |
| 1781807188 | 346 Count | 537 Count | 305 Count | 3.84 VDC | 0.08 VDC |
| 1781805384 | 345 Count | 536 Count | 305 Count | 3.87 VDC | 0.08 VDC |
| 1781803581 | 343 Count | 533 Count | 304 Count | 3.9 VDC | 0.08 VDC |
| 1781801777 | 342 Count | 529 Count | 304 Count | 3.91 VDC | 0.08 VDC |
| 1781799973 | 341 Count | 527 Count | 304 Count | 3.92 VDC | 0.08 VDC |
| 1781798213 | 340 Count | 525 Count | 304 Count | 3.92 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)