This is the latest recevied telemetry packets stored in our database for station/object VK3XEM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770200354 | 696 Count | 386 Count | 386 Count | 0 VDC | 0 VDC |
| 1770199450 | 694 Count | 385 Count | 385 Count | 0 VDC | 0 VDC |
| 1770198645 | 692 Count | 384 Count | 384 Count | 0 VDC | 0 VDC |
| 1770197741 | 690 Count | 383 Count | 383 Count | 0 VDC | 0 VDC |
| 1770196836 | 688 Count | 382 Count | 382 Count | 0 VDC | 0 VDC |
| 1770195932 | 686 Count | 381 Count | 381 Count | 0 VDC | 0 VDC |
| 1770195028 | 684 Count | 380 Count | 380 Count | 0 VDC | 0 VDC |
| 1770194124 | 682 Count | 379 Count | 379 Count | 0 VDC | 0 VDC |
| 1770193220 | 679 Count | 377 Count | 377 Count | 0 VDC | 0 VDC |
| 1770192316 | 676 Count | 375 Count | 375 Count | 0 VDC | 0 VDC |
| 1770191411 | 672 Count | 372 Count | 372 Count | 0 VDC | 0 VDC |
| 1770190507 | 669 Count | 370 Count | 370 Count | 0 VDC | 0 VDC |
| 1770189603 | 667 Count | 369 Count | 369 Count | 0 VDC | 0 VDC |
| 1770188699 | 665 Count | 368 Count | 368 Count | 0 VDC | 0 VDC |
| 1770187795 | 663 Count | 367 Count | 367 Count | 0 VDC | 0 VDC |
| 1770186891 | 661 Count | 366 Count | 366 Count | 0 VDC | 0 VDC |
| 1770185987 | 659 Count | 365 Count | 365 Count | 0 VDC | 0 VDC |
| 1770185083 | 657 Count | 364 Count | 364 Count | 0 VDC | 0 VDC |
| 1770184179 | 655 Count | 363 Count | 363 Count | 0 VDC | 0 VDC |
| 1770183275 | 653 Count | 362 Count | 362 Count | 0 VDC | 0 VDC |
| 1770182371 | 651 Count | 361 Count | 361 Count | 0 VDC | 0 VDC |
| 1770181466 | 649 Count | 360 Count | 360 Count | 0 VDC | 0 VDC |
| 1770180562 | 647 Count | 359 Count | 359 Count | 0 VDC | 0 VDC |
| 1770179658 | 645 Count | 358 Count | 358 Count | 0 VDC | 0 VDC |
| 1770178754 | 643 Count | 357 Count | 357 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)