This is the latest recevied telemetry packets stored in our database for station/object VK3XEM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769614526 | 304 Count | 158 Count | 155 Count | 0 VDC | 0 VDC |
| 1769613622 | 302 Count | 157 Count | 154 Count | 0 VDC | 0 VDC |
| 1769612718 | 300 Count | 156 Count | 153 Count | 0 VDC | 0 VDC |
| 1769611814 | 298 Count | 155 Count | 152 Count | 0 VDC | 0 VDC |
| 1769610910 | 296 Count | 154 Count | 151 Count | 0 VDC | 0 VDC |
| 1769610006 | 294 Count | 153 Count | 150 Count | 0 VDC | 0 VDC |
| 1769609102 | 292 Count | 152 Count | 149 Count | 0 VDC | 0 VDC |
| 1769608198 | 288 Count | 149 Count | 146 Count | 0 VDC | 0 VDC |
| 1769607294 | 286 Count | 148 Count | 145 Count | 0 VDC | 0 VDC |
| 1769606390 | 284 Count | 147 Count | 144 Count | 0 VDC | 0 VDC |
| 1769605486 | 282 Count | 146 Count | 143 Count | 0 VDC | 0 VDC |
| 1769604582 | 280 Count | 145 Count | 142 Count | 0 VDC | 0 VDC |
| 1769603678 | 278 Count | 144 Count | 141 Count | 0 VDC | 0 VDC |
| 1769602774 | 276 Count | 143 Count | 140 Count | 0 VDC | 0 VDC |
| 1769601869 | 274 Count | 142 Count | 139 Count | 0 VDC | 0 VDC |
| 1769600965 | 272 Count | 141 Count | 138 Count | 0 VDC | 0 VDC |
| 1769600061 | 270 Count | 140 Count | 137 Count | 0 VDC | 0 VDC |
| 1769599157 | 268 Count | 139 Count | 136 Count | 0 VDC | 0 VDC |
| 1769598253 | 266 Count | 138 Count | 135 Count | 0 VDC | 0 VDC |
| 1769597349 | 264 Count | 137 Count | 134 Count | 0 VDC | 0 VDC |
| 1769596445 | 262 Count | 136 Count | 133 Count | 0 VDC | 0 VDC |
| 1769595541 | 260 Count | 135 Count | 132 Count | 0 VDC | 0 VDC |
| 1769594637 | 258 Count | 134 Count | 131 Count | 0 VDC | 0 VDC |
| 1769593973 | 256 Count | 133 Count | 130 Count | 0 VDC | 0 VDC |
| 1769593069 | 254 Count | 132 Count | 129 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)