This is the latest recevied telemetry packets stored in our database for station/object SP3ZBY-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782070187 | 156 Count | 140 Count | 134 Count | 4 VDC | 0 VDC |
| 1782068386 | 153 Count | 138 Count | 132 Count | 4 VDC | 0 VDC |
| 1782066585 | 149 Count | 135 Count | 129 Count | 4 VDC | 0 VDC |
| 1782064784 | 144 Count | 131 Count | 125 Count | 4 VDC | 0 VDC |
| 1782062983 | 141 Count | 129 Count | 123 Count | 4 VDC | 0 VDC |
| 1782061183 | 129 Count | 118 Count | 112 Count | 4 VDC | 0 VDC |
| 1782059382 | 123 Count | 113 Count | 107 Count | 4 VDC | 0 VDC |
| 1782057581 | 116 Count | 104 Count | 101 Count | 4 VDC | 0 VDC |
| 1782054902 | 111 Count | 98 Count | 98 Count | 3.99 VDC | 0 VDC |
| 1782053101 | 105 Count | 93 Count | 93 Count | 4 VDC | 0 VDC |
| 1782051300 | 92 Count | 81 Count | 81 Count | 4 VDC | 0 VDC |
| 1782049499 | 72 Count | 62 Count | 62 Count | 4.01 VDC | 0 VDC |
| 1782047754 | 70 Count | 62 Count | 62 Count | 4 VDC | 0 VDC |
| 1782045953 | 64 Count | 57 Count | 57 Count | 3.99 VDC | 0 VDC |
| 1782044152 | 59 Count | 53 Count | 53 Count | 4 VDC | 0 VDC |
| 1782042351 | 56 Count | 51 Count | 51 Count | 4 VDC | 0 VDC |
| 1782040560 | 44 Count | 40 Count | 40 Count | 4 VDC | 0 VDC |
| 1782038759 | 27 Count | 24 Count | 24 Count | 4 VDC | 0 VDC |
| 1782036958 | 20 Count | 18 Count | 18 Count | 4 VDC | 0 VDC |
| 1782035158 | 11 Count | 10 Count | 10 Count | 4 VDC | 0 VDC |
| 1782033357 | 6 Count | 6 Count | 6 Count | 4 VDC | 0 VDC |
| 1782031556 | 1001 Count | 919 Count | 908 Count | 4.01 VDC | 0 VDC |
| 1782029755 | 997 Count | 916 Count | 905 Count | 4 VDC | 0 VDC |
| 1782027954 | 986 Count | 906 Count | 895 Count | 4 VDC | 0 VDC |
| 1782026153 | 982 Count | 903 Count | 892 Count | 4 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)