This is the latest recevied telemetry packets stored in our database for station/object SP3ZBY-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1771002763 | 788 Count | 753 Count | 752 Count | 4 VDC | 0 VDC |
| 1771000972 | 775 Count | 741 Count | 740 Count | 4 VDC | 0 VDC |
| 1770999171 | 762 Count | 729 Count | 728 Count | 3.99 VDC | 0 VDC |
| 1770997370 | 740 Count | 708 Count | 707 Count | 4 VDC | 0 VDC |
| 1770995569 | 729 Count | 698 Count | 697 Count | 4 VDC | 0 VDC |
| 1770993769 | 718 Count | 688 Count | 687 Count | 4 VDC | 0 VDC |
| 1770991968 | 707 Count | 678 Count | 677 Count | 4 VDC | 0 VDC |
| 1770990167 | 696 Count | 668 Count | 667 Count | 4.01 VDC | 0 VDC |
| 1770988366 | 673 Count | 646 Count | 645 Count | 4 VDC | 0 VDC |
| 1770986565 | 660 Count | 634 Count | 633 Count | 4 VDC | 0 VDC |
| 1770984764 | 643 Count | 618 Count | 617 Count | 4 VDC | 0 VDC |
| 1770982963 | 621 Count | 596 Count | 596 Count | 4 VDC | 0 VDC |
| 1770981163 | 607 Count | 583 Count | 583 Count | 4 VDC | 0 VDC |
| 1770979371 | 584 Count | 561 Count | 561 Count | 4 VDC | 0 VDC |
| 1770977571 | 571 Count | 549 Count | 549 Count | 3.99 VDC | 0 VDC |
| 1770975770 | 559 Count | 538 Count | 538 Count | 4 VDC | 0 VDC |
| 1770973969 | 534 Count | 514 Count | 514 Count | 4 VDC | 0 VDC |
| 1770972168 | 510 Count | 491 Count | 491 Count | 4 VDC | 0 VDC |
| 1770970367 | 436 Count | 418 Count | 418 Count | 4 VDC | 0 VDC |
| 1770968566 | 341 Count | 324 Count | 324 Count | 4 VDC | 0 VDC |
| 1770966765 | 275 Count | 259 Count | 259 Count | 4 VDC | 0 VDC |
| 1770964964 | 224 Count | 209 Count | 209 Count | 4.01 VDC | 0 VDC |
| 1770963164 | 177 Count | 163 Count | 163 Count | 4 VDC | 0 VDC |
| 1770961363 | 159 Count | 146 Count | 146 Count | 4.01 VDC | 0 VDC |
| 1770959562 | 148 Count | 136 Count | 136 Count | 4 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)