This is the latest recevied telemetry packets stored in our database for station/object SP3ZBY-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775282613 | 285 Count | 237 Count | 237 Count | 4 VDC | 0 VDC |
| 1775280813 | 281 Count | 234 Count | 234 Count | 4.01 VDC | 0 VDC |
| 1775279012 | 278 Count | 232 Count | 232 Count | 4.01 VDC | 0 VDC |
| 1775277211 | 273 Count | 228 Count | 228 Count | 4 VDC | 0 VDC |
| 1775275410 | 269 Count | 225 Count | 225 Count | 4 VDC | 0 VDC |
| 1775273609 | 264 Count | 221 Count | 221 Count | 4.01 VDC | 0 VDC |
| 1775271808 | 261 Count | 219 Count | 219 Count | 4 VDC | 0 VDC |
| 1775270007 | 258 Count | 217 Count | 217 Count | 4 VDC | 0 VDC |
| 1775268216 | 255 Count | 215 Count | 215 Count | 4.01 VDC | 0 VDC |
| 1775266415 | 252 Count | 213 Count | 213 Count | 4 VDC | 0 VDC |
| 1775264614 | 249 Count | 211 Count | 211 Count | 4.01 VDC | 0 VDC |
| 1775262813 | 245 Count | 208 Count | 208 Count | 4 VDC | 0 VDC |
| 1775261013 | 240 Count | 204 Count | 204 Count | 4 VDC | 0 VDC |
| 1775259212 | 236 Count | 201 Count | 201 Count | 4 VDC | 0 VDC |
| 1775257411 | 232 Count | 198 Count | 198 Count | 4 VDC | 0 VDC |
| 1775255610 | 227 Count | 194 Count | 194 Count | 4 VDC | 0 VDC |
| 1775253809 | 222 Count | 190 Count | 190 Count | 4 VDC | 0 VDC |
| 1775252008 | 212 Count | 181 Count | 181 Count | 4 VDC | 0 VDC |
| 1775250207 | 206 Count | 176 Count | 176 Count | 4.01 VDC | 0 VDC |
| 1775248406 | 196 Count | 167 Count | 167 Count | 4.01 VDC | 0 VDC |
| 1775246616 | 171 Count | 143 Count | 143 Count | 4.01 VDC | 0 VDC |
| 1775244815 | 164 Count | 137 Count | 137 Count | 4.01 VDC | 0 VDC |
| 1775243014 | 160 Count | 134 Count | 134 Count | 4 VDC | 0 VDC |
| 1775241213 | 157 Count | 132 Count | 132 Count | 4.01 VDC | 0 VDC |
| 1775239412 | 153 Count | 129 Count | 129 Count | 4.01 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)