This is the latest recevied telemetry packets stored in our database for station/object SP3ZBY-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791080672 | 185 Count | 179 Count | 169 Count | 4 VDC | 0 VDC |
| 1791078872 | 175 Count | 169 Count | 160 Count | 4 VDC | 0 VDC |
| 1791077071 | 164 Count | 159 Count | 150 Count | 3.99 VDC | 0 VDC |
| 1791075270 | 153 Count | 149 Count | 140 Count | 4 VDC | 0 VDC |
| 1791073469 | 142 Count | 138 Count | 130 Count | 4 VDC | 0 VDC |
| 1791071668 | 131 Count | 128 Count | 120 Count | 4 VDC | 0 VDC |
| 1791069867 | 120 Count | 118 Count | 110 Count | 4 VDC | 0 VDC |
| 1791068076 | 109 Count | 107 Count | 100 Count | 4 VDC | 0 VDC |
| 1791066275 | 98 Count | 96 Count | 90 Count | 4 VDC | 0 VDC |
| 1791064474 | 88 Count | 87 Count | 81 Count | 4 VDC | 0 VDC |
| 1791062673 | 76 Count | 75 Count | 70 Count | 4 VDC | 0 VDC |
| 1791060873 | 65 Count | 64 Count | 60 Count | 4 VDC | 0 VDC |
| 1791059072 | 54 Count | 53 Count | 50 Count | 3.99 VDC | 0 VDC |
| 1791057271 | 43 Count | 42 Count | 40 Count | 4 VDC | 0 VDC |
| 1791055470 | 32 Count | 32 Count | 30 Count | 4 VDC | 0 VDC |
| 1791053669 | 21 Count | 21 Count | 20 Count | 4 VDC | 0 VDC |
| 1791051868 | 10 Count | 11 Count | 10 Count | 4 VDC | 0 VDC |
| 1791050067 | 1003 Count | 996 Count | 920 Count | 4 VDC | 0 VDC |
| 1791048266 | 992 Count | 985 Count | 910 Count | 4 VDC | 0 VDC |
| 1791046476 | 981 Count | 975 Count | 900 Count | 4 VDC | 0 VDC |
| 1791042875 | 959 Count | 953 Count | 880 Count | 4 VDC | 0 VDC |
| 1791041074 | 948 Count | 943 Count | 870 Count | 4 VDC | 0 VDC |
| 1791037472 | 926 Count | 921 Count | 850 Count | 4 VDC | 0 VDC |
| 1791035671 | 915 Count | 910 Count | 840 Count | 4 VDC | 0 VDC |
| 1791033870 | 905 Count | 901 Count | 831 Count | 4 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)