This is the latest recevied telemetry packets stored in our database for station/object SQ9KFP-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779663025 | 159 Count | 495 Count | 0 Count | 0 VDC | 0 VDC |
| 1779662125 | 158 Count | 487 Count | 0 Count | 0 VDC | 0 VDC |
| 1779661498 | 153 Count | 487 Count | 0 Count | 0 VDC | 0 VDC |
| 1779660598 | 152 Count | 477 Count | 0 Count | 0 VDC | 0 VDC |
| 1779659697 | 151 Count | 472 Count | 0 Count | 0 VDC | 0 VDC |
| 1779659003 | 150 Count | 466 Count | 0 Count | 0 VDC | 0 VDC |
| 1779657896 | 149 Count | 449 Count | 0 Count | 0 VDC | 0 VDC |
| 1779656995 | 148 Count | 431 Count | 0 Count | 0 VDC | 0 VDC |
| 1779656095 | 147 Count | 414 Count | 0 Count | 0 VDC | 0 VDC |
| 1779654415 | 145 Count | 367 Count | 0 Count | 0 VDC | 0 VDC |
| 1779653846 | 144 Count | 350 Count | 0 Count | 0 VDC | 0 VDC |
| 1779652492 | 143 Count | 326 Count | 0 Count | 0 VDC | 0 VDC |
| 1779651593 | 142 Count | 310 Count | 0 Count | 0 VDC | 0 VDC |
| 1779650691 | 141 Count | 292 Count | 0 Count | 0 VDC | 0 VDC |
| 1779649791 | 140 Count | 270 Count | 0 Count | 0 VDC | 0 VDC |
| 1779648660 | 134 Count | 242 Count | 0 Count | 0 VDC | 0 VDC |
| 1779648151 | 129 Count | 242 Count | 0 Count | 0 VDC | 0 VDC |
| 1779644091 | 110 Count | 201 Count | 0 Count | 0 VDC | 0 VDC |
| 1779643425 | 109 Count | 189 Count | 0 Count | 0 VDC | 0 VDC |
| 1779642292 | 108 Count | 185 Count | 0 Count | 0 VDC | 0 VDC |
| 1779640724 | 102 Count | 178 Count | 0 Count | 0 VDC | 0 VDC |
| 1779640694 | 98 Count | 185 Count | 0 Count | 0 VDC | 0 VDC |
| 1779639793 | 97 Count | 178 Count | 0 Count | 0 VDC | 0 VDC |
| 1779638898 | 96 Count | 167 Count | 0 Count | 0 VDC | 0 VDC |
| 1779638678 | 91 Count | 167 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)