This is the latest recevied telemetry packets stored in our database for station/object IT9ZOB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773517823 | 299 Count | 570 Count | 0 Count | 0 VDC | 0 VDC |
| 1773516020 | 298 Count | 570 Count | 0 Count | 0 VDC | 0 VDC |
| 1773514216 | 297 Count | 570 Count | 0 Count | 0 VDC | 0 VDC |
| 1773512413 | 296 Count | 570 Count | 0 Count | 0 VDC | 0 VDC |
| 1773510609 | 295 Count | 570 Count | 0 Count | 0 VDC | 0 VDC |
| 1773508806 | 294 Count | 570 Count | 0 Count | 0 VDC | 0 VDC |
| 1773507003 | 293 Count | 568 Count | 0 Count | 0 VDC | 0 VDC |
| 1773505234 | 292 Count | 567 Count | 0 Count | 0 VDC | 0 VDC |
| 1773503431 | 291 Count | 567 Count | 0 Count | 0 VDC | 0 VDC |
| 1773501627 | 290 Count | 565 Count | 0 Count | 0 VDC | 0 VDC |
| 1773499824 | 289 Count | 563 Count | 0 Count | 0 VDC | 0 VDC |
| 1773498021 | 288 Count | 561 Count | 0 Count | 0 VDC | 0 VDC |
| 1773496217 | 287 Count | 559 Count | 0 Count | 0 VDC | 0 VDC |
| 1773494414 | 286 Count | 557 Count | 0 Count | 0 VDC | 0 VDC |
| 1773492610 | 285 Count | 555 Count | 0 Count | 0 VDC | 0 VDC |
| 1773490806 | 284 Count | 553 Count | 0 Count | 0 VDC | 0 VDC |
| 1773489003 | 283 Count | 551 Count | 0 Count | 0 VDC | 0 VDC |
| 1773487202 | 282 Count | 549 Count | 0 Count | 0 VDC | 0 VDC |
| 1773485396 | 281 Count | 547 Count | 0 Count | 0 VDC | 0 VDC |
| 1773483633 | 280 Count | 545 Count | 0 Count | 0 VDC | 0 VDC |
| 1773481828 | 279 Count | 542 Count | 0 Count | 0 VDC | 0 VDC |
| 1773480025 | 278 Count | 540 Count | 0 Count | 0 VDC | 0 VDC |
| 1773478223 | 277 Count | 538 Count | 0 Count | 0 VDC | 0 VDC |
| 1773476418 | 276 Count | 536 Count | 0 Count | 0 VDC | 0 VDC |
| 1773474614 | 275 Count | 535 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)