This is the latest recevied telemetry packets stored in our database for station/object LD9NK-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769658476 | 14 Count | 0 Count | 0 Count | 3.35 VDC | 0 VDC |
| 1769656931 | 9 Count | 0 Count | 0 Count | 3.35 VDC | 0 VDC |
| 1769655066 | 4 Count | 0 Count | 0 Count | 3.35 VDC | 0 VDC |
| 1769640097 | 4 Count | 190 Count | 0 Count | 3.85 VDC | 0 VDC |
| 1769618496 | 353 Count | 993 Count | 305 Count | 4.23 VDC | 0 VDC |
| 1769618191 | 348 Count | 802 Count | 305 Count | 4.23 VDC | 0 VDC |
| 1769617643 | 343 Count | 607 Count | 305 Count | 4.15 VDC | 0 VDC |
| 1769615837 | 340 Count | 605 Count | 303 Count | 4.15 VDC | 0 VDC |
| 1769360692 | 325 Count | 605 Count | 303 Count | 4.22 VDC | 0 VDC |
| 1769358891 | 319 Count | 600 Count | 298 Count | 4.2 VDC | 0 VDC |
| 1769357089 | 315 Count | 597 Count | 295 Count | 4.17 VDC | 0 VDC |
| 1769355288 | 311 Count | 594 Count | 292 Count | 4.04 VDC | 0 VDC |
| 1769353487 | 307 Count | 591 Count | 289 Count | 4.02 VDC | 0 VDC |
| 1769351685 | 303 Count | 588 Count | 286 Count | 3.9 VDC | 0 VDC |
| 1769349884 | 278 Count | 540 Count | 262 Count | 3.55 VDC | 0 VDC |
| 1769317483 | 273 Count | 540 Count | 262 Count | 3.38 VDC | 0 VDC |
| 1769315682 | 239 Count | 470 Count | 229 Count | 3.52 VDC | 0 VDC |
| 1769313880 | 204 Count | 403 Count | 195 Count | 3.6 VDC | 0 VDC |
| 1769312092 | 169 Count | 340 Count | 165 Count | 3.69 VDC | 0 VDC |
| 1769310291 | 135 Count | 270 Count | 132 Count | 3.75 VDC | 0 VDC |
| 1769308490 | 99 Count | 196 Count | 97 Count | 3.79 VDC | 0 VDC |
| 1769306689 | 66 Count | 129 Count | 65 Count | 3.81 VDC | 0 VDC |
| 1769304888 | 34 Count | 64 Count | 34 Count | 3.83 VDC | 0 VDC |
| 1769303086 | 527 Count | 1024 Count | 509 Count | 3.85 VDC | 0 VDC |
| 1769301285 | 495 Count | 963 Count | 478 Count | 3.86 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)