This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1764944824 | 3.74 V | 0 V | 272 mW | 30 degC | 99200 Pa |
| 1764944693 | 3.84 V | 0 V | 340 mW | 30.3 degC | 99212.5 Pa |
| 1764944666 | 3.73 V | 0 V | 306 mW | 30.1 degC | 99212.5 Pa |
| 1764944612 | 3.74 V | 0 V | 286 mW | 30.1 degC | 99212.5 Pa |
| 1764944470 | 3.74 V | 0 V | 290 mW | 30.2 degC | 99212.5 Pa |
| 1764944345 | 3.73 V | 0 V | 372 mW | 30.3 degC | 99212.5 Pa |
| 1764944309 | 3.73 V | 0 V | 314 mW | 30.2 degC | 99212.5 Pa |
| 1764944225 | 3.73 V | 0 V | 298 mW | 30.1 degC | 99225 Pa |
| 1764944105 | 3.73 V | 0 V | 296 mW | 30.2 degC | 99225 Pa |
| 1764944028 | 3.78 V | 0 V | 320 mW | 30.3 degC | 99225 Pa |
| 1764943963 | 3.69 V | 0 V | 352 mW | 30.4 degC | 99225 Pa |
| 1764943958 | 3.78 V | 0 V | 320 mW | 30.3 degC | 99225 Pa |
| 1764943858 | 3.74 V | 0 V | 296 mW | 30.3 degC | 99237.5 Pa |
| 1764943772 | 3.75 V | 0 V | 304 mW | 30.4 degC | 99237.5 Pa |
| 1764943631 | 3.71 V | 0 V | 342 mW | 30.5 degC | 99237.5 Pa |
| 1764943600 | 3.76 V | 0 V | 316 mW | 30.6 degC | 99237.5 Pa |
| 1764943590 | 3.71 V | 0 V | 342 mW | 30.5 degC | 99237.5 Pa |
| 1764943479 | 3.74 V | 0 V | 476 mW | 30.8 degC | 99250 Pa |
| 1764943406 | 3.73 V | 0 V | 306 mW | 30.4 degC | 99237.5 Pa |
| 1764943296 | 3.75 V | 0 V | 354 mW | 30.5 degC | 99250 Pa |
| 1764943254 | 3.72 V | 0 V | 330 mW | 30.4 degC | 99237.5 Pa |
| 1764943239 | 3.75 V | 0 V | 354 mW | 30.5 degC | 99250 Pa |
| 1764943155 | 3.72 V | 0 V | 308 mW | 30.3 degC | 99250 Pa |
| 1764943040 | 3.64 V | 0 V | 316 mW | 30.4 degC | 99250 Pa |
| 1764942907 | 3.73 V | 0 V | 372 mW | 30.6 degC | 99250 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)