This is the latest recevied telemetry packets stored in our database for station/object KY1N-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732339408 | 429 Volts | 581 Deg.F | 0 | 0 | 0 |
| 1732338510 | 429 Volts | 582 Deg.F | 0 | 0 | 0 |
| 1732337613 | 429 Volts | 582 Deg.F | 0 | 0 | 0 |
| 1732336716 | 430 Volts | 582 Deg.F | 0 | 0 | 0 |
| 1732334921 | 431 Volts | 583 Deg.F | 0 | 0 | 0 |
| 1732334024 | 431 Volts | 584 Deg.F | 0 | 0 | 0 |
| 1732333127 | 431 Volts | 585 Deg.F | 0 | 0 | 0 |
| 1732332229 | 432 Volts | 586 Deg.F | 0 | 0 | 0 |
| 1732331332 | 432 Volts | 586 Deg.F | 0 | 0 | 0 |
| 1732330435 | 433 Volts | 588 Deg.F | 0 | 0 | 0 |
| 1732329537 | 434 Volts | 589 Deg.F | 0 | 0 | 0 |
| 1732328640 | 435 Volts | 591 Deg.F | 0 | 0 | 0 |
| 1732327743 | 437 Volts | 593 Deg.F | 0 | 0 | 0 |
| 1732326845 | 492 Volts | 597 Deg.F | 0 | 0 | 0 |
| 1732326802 | 494 Volts | 597 Deg.F | 0 | 0 | 0 |
| 1732326744 | 494 Volts | 597 Deg.F | 0 | 0 | 0 |
| 1732326610 | 487 Volts | 597 Deg.F | 0 | 0 | 0 |
| 1732326352 | 485 Volts | 597 Deg.F | 0 | 0 | 0 |
| 1732326263 | 496 Volts | 596 Deg.F | 0 | 0 | 0 |
| 1732326186 | 493 Volts | 596 Deg.F | 0 | 0 | 0 |
| 1732326061 | 482 Volts | 595 Deg.F | 0 | 0 | 0 |
| 1732325883 | 489 Volts | 594 Deg.F | 0 | 0 | 0 |
| 1732325793 | 491 Volts | 594 Deg.F | 0 | 0 | 0 |
| 1732325691 | 482 Volts | 594 Deg.F | 0 | 0 | 0 |
| 1732325639 | 489 Volts | 593 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)