This is the latest recevied telemetry packets stored in our database for station/object SP8SD-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788091695 | 832 Count | 666 Count | 592 Count | 0.28 VDC | 3.14 VDC |
| 1788091394 | 829 Count | 664 Count | 590 Count | 0.28 VDC | 3.14 VDC |
| 1788091094 | 822 Count | 657 Count | 584 Count | 0.28 VDC | 3.14 VDC |
| 1788090793 | 820 Count | 656 Count | 583 Count | 0.28 VDC | 3.14 VDC |
| 1788090493 | 817 Count | 654 Count | 581 Count | 0.28 VDC | 2.9 VDC |
| 1788090192 | 810 Count | 647 Count | 575 Count | 0.28 VDC | 3.14 VDC |
| 1788089891 | 807 Count | 645 Count | 573 Count | 0.28 VDC | 3.14 VDC |
| 1788089591 | 805 Count | 644 Count | 572 Count | 0.28 VDC | 1.58 VDC |
| 1788089290 | 798 Count | 637 Count | 566 Count | 0.28 VDC | 3.14 VDC |
| 1788088989 | 795 Count | 635 Count | 564 Count | 0.28 VDC | 3.14 VDC |
| 1788088689 | 793 Count | 634 Count | 563 Count | 0.28 VDC | 3.14 VDC |
| 1788088388 | 786 Count | 627 Count | 557 Count | 0.28 VDC | 3.14 VDC |
| 1788088087 | 783 Count | 625 Count | 555 Count | 0.28 VDC | 3.14 VDC |
| 1788087787 | 780 Count | 623 Count | 553 Count | 0.28 VDC | 3.14 VDC |
| 1788087486 | 774 Count | 617 Count | 548 Count | 0.28 VDC | 3.14 VDC |
| 1788087186 | 771 Count | 615 Count | 546 Count | 0.28 VDC | 1.56 VDC |
| 1788086885 | 768 Count | 613 Count | 544 Count | 0.28 VDC | 3.14 VDC |
| 1788086584 | 762 Count | 607 Count | 539 Count | 0.28 VDC | 3.14 VDC |
| 1788086284 | 759 Count | 605 Count | 537 Count | 0.28 VDC | 1.78 VDC |
| 1788085983 | 756 Count | 603 Count | 535 Count | 0.28 VDC | 3.14 VDC |
| 1788085682 | 749 Count | 596 Count | 529 Count | 0.28 VDC | 3.14 VDC |
| 1788085382 | 747 Count | 595 Count | 528 Count | 0.28 VDC | 3.14 VDC |
| 1788085081 | 744 Count | 593 Count | 526 Count | 0.28 VDC | 3.14 VDC |
| 1788084781 | 737 Count | 586 Count | 520 Count | 0.28 VDC | 1.42 VDC |
| 1788084480 | 735 Count | 585 Count | 519 Count | 0.28 VDC | 3.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)