This is the latest recevied telemetry packets stored in our database for station/object PE1PNX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783628026 | 519 Count | 259 Count | 235 Count | 0 VDC | 0 VDC |
| 1783626220 | 518 Count | 259 Count | 235 Count | 0 VDC | 0 VDC |
| 1783624417 | 517 Count | 259 Count | 235 Count | 0 VDC | 0 VDC |
| 1783620810 | 515 Count | 259 Count | 235 Count | 0 VDC | 0 VDC |
| 1783619006 | 514 Count | 259 Count | 235 Count | 0 VDC | 0 VDC |
| 1783617201 | 513 Count | 259 Count | 235 Count | 0 VDC | 0 VDC |
| 1783615399 | 512 Count | 259 Count | 235 Count | 0 VDC | 0 VDC |
| 1783613596 | 511 Count | 259 Count | 235 Count | 0 VDC | 0 VDC |
| 1783611792 | 510 Count | 259 Count | 235 Count | 0 VDC | 0 VDC |
| 1783610028 | 505 Count | 259 Count | 235 Count | 0 VDC | 0 VDC |
| 1783608225 | 504 Count | 259 Count | 235 Count | 0 VDC | 0 VDC |
| 1783606423 | 503 Count | 259 Count | 235 Count | 0 VDC | 0 VDC |
| 1783604618 | 502 Count | 259 Count | 235 Count | 0 VDC | 0 VDC |
| 1783602815 | 497 Count | 255 Count | 231 Count | 0 VDC | 0 VDC |
| 1783599206 | 495 Count | 255 Count | 231 Count | 0 VDC | 0 VDC |
| 1783597402 | 494 Count | 255 Count | 231 Count | 0 VDC | 0 VDC |
| 1783595599 | 493 Count | 255 Count | 231 Count | 0 VDC | 0 VDC |
| 1783593797 | 492 Count | 255 Count | 231 Count | 0 VDC | 0 VDC |
| 1783591993 | 488 Count | 252 Count | 228 Count | 0 VDC | 0 VDC |
| 1783590189 | 487 Count | 252 Count | 228 Count | 0 VDC | 0 VDC |
| 1783588426 | 482 Count | 252 Count | 228 Count | 0 VDC | 0 VDC |
| 1783586623 | 481 Count | 252 Count | 228 Count | 0 VDC | 0 VDC |
| 1783584820 | 480 Count | 252 Count | 228 Count | 0 VDC | 0 VDC |
| 1783583016 | 479 Count | 252 Count | 228 Count | 0 VDC | 0 VDC |
| 1783581212 | 478 Count | 252 Count | 228 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)