This is the latest recevied telemetry packets stored in our database for station/object SQ8RZE-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770173624 | 235 Count | 523 Count | 213 Count | 0 VDC | 0 VDC |
| 1770172739 | 225 Count | 509 Count | 208 Count | 0 VDC | 0 VDC |
| 1770171838 | 214 Count | 482 Count | 198 Count | 0 VDC | 0 VDC |
| 1770170939 | 208 Count | 469 Count | 193 Count | 0 VDC | 0 VDC |
| 1770170037 | 190 Count | 429 Count | 176 Count | 0 VDC | 0 VDC |
| 1770169136 | 185 Count | 415 Count | 172 Count | 0 VDC | 0 VDC |
| 1770168236 | 174 Count | 388 Count | 162 Count | 0 VDC | 0 VDC |
| 1770167335 | 162 Count | 363 Count | 151 Count | 0 VDC | 0 VDC |
| 1770166435 | 159 Count | 358 Count | 149 Count | 0 VDC | 0 VDC |
| 1770165534 | 156 Count | 351 Count | 147 Count | 0 VDC | 0 VDC |
| 1770164633 | 142 Count | 324 Count | 134 Count | 0 VDC | 0 VDC |
| 1770163732 | 130 Count | 290 Count | 123 Count | 0 VDC | 0 VDC |
| 1770162832 | 110 Count | 262 Count | 104 Count | 0 VDC | 0 VDC |
| 1770161931 | 98 Count | 236 Count | 93 Count | 0 VDC | 0 VDC |
| 1770161030 | 91 Count | 222 Count | 87 Count | 0 VDC | 0 VDC |
| 1770160129 | 79 Count | 181 Count | 76 Count | 0 VDC | 0 VDC |
| 1770159229 | 57 Count | 112 Count | 55 Count | 0 VDC | 0 VDC |
| 1770158328 | 28 Count | 63 Count | 27 Count | 0 VDC | 0 VDC |
| 1770157427 | 10 Count | 20 Count | 10 Count | 0 VDC | 0 VDC |
| 1770156526 | 468 Count | 1023 Count | 410 Count | 0 VDC | 0 VDC |
| 1770155626 | 456 Count | 993 Count | 399 Count | 0 VDC | 0 VDC |
| 1770154725 | 450 Count | 983 Count | 394 Count | 0 VDC | 0 VDC |
| 1770153824 | 438 Count | 953 Count | 383 Count | 0 VDC | 0 VDC |
| 1770152924 | 420 Count | 925 Count | 366 Count | 0 VDC | 0 VDC |
| 1770152023 | 398 Count | 869 Count | 345 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)