This is the latest recevied telemetry packets stored in our database for station/object SP9KKK-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791038617 | 73 Count | 262 Count | 72 Count | 3.94 VDC | 0 VDC |
| 1791037717 | 30 Count | 115 Count | 30 Count | 3.94 VDC | 0 VDC |
| 1791036816 | 310 Count | 1089 Count | 301 Count | 3.94 VDC | 0 VDC |
| 1791035915 | 276 Count | 994 Count | 268 Count | 3.94 VDC | 0 VDC |
| 1791035014 | 234 Count | 849 Count | 227 Count | 3.94 VDC | 0 VDC |
| 1791034113 | 207 Count | 754 Count | 201 Count | 3.94 VDC | 0 VDC |
| 1791033212 | 188 Count | 671 Count | 183 Count | 3.94 VDC | 0 VDC |
| 1791032312 | 166 Count | 592 Count | 162 Count | 3.94 VDC | 0 VDC |
| 1791031411 | 138 Count | 488 Count | 135 Count | 3.94 VDC | 0 VDC |
| 1791030510 | 105 Count | 367 Count | 103 Count | 3.95 VDC | 0 VDC |
| 1791029609 | 69 Count | 230 Count | 68 Count | 3.94 VDC | 0 VDC |
| 1791028708 | 25 Count | 91 Count | 25 Count | 3.95 VDC | 0 VDC |
| 1791027807 | 262 Count | 1063 Count | 247 Count | 3.96 VDC | 0 VDC |
| 1791026905 | 229 Count | 959 Count | 215 Count | 3.96 VDC | 0 VDC |
| 1791026004 | 210 Count | 873 Count | 197 Count | 3.93 VDC | 0 VDC |
| 1791025123 | 186 Count | 787 Count | 178 Count | 3.95 VDC | 0 VDC |
| 1791024222 | 160 Count | 674 Count | 153 Count | 3.94 VDC | 0 VDC |
| 1791023321 | 138 Count | 586 Count | 132 Count | 3.95 VDC | 0 VDC |
| 1791022420 | 118 Count | 496 Count | 113 Count | 3.94 VDC | 0 VDC |
| 1791021519 | 97 Count | 413 Count | 93 Count | 3.94 VDC | 0 VDC |
| 1791020618 | 76 Count | 339 Count | 73 Count | 3.94 VDC | 0 VDC |
| 1791019718 | 55 Count | 254 Count | 53 Count | 3.94 VDC | 0 VDC |
| 1791018817 | 37 Count | 174 Count | 36 Count | 3.94 VDC | 0 VDC |
| 1791017916 | 20 Count | 80 Count | 20 Count | 3.94 VDC | 0 VDC |
| 1791017015 | 238 Count | 1087 Count | 230 Count | 3.94 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)