This is the latest recevied telemetry packets stored in our database for station/object SQ5LTL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1764942173 | 306 Count | 425 Count | 76 Count | 0 VDC | 0 VDC |
| 1764940372 | 305 Count | 424 Count | 76 Count | 0 VDC | 0 VDC |
| 1764938571 | 304 Count | 423 Count | 76 Count | 0 VDC | 0 VDC |
| 1764936771 | 303 Count | 423 Count | 76 Count | 0 VDC | 0 VDC |
| 1764934970 | 302 Count | 422 Count | 76 Count | 0 VDC | 0 VDC |
| 1764933170 | 301 Count | 421 Count | 76 Count | 0 VDC | 0 VDC |
| 1764931376 | 300 Count | 420 Count | 76 Count | 0 VDC | 0 VDC |
| 1764929575 | 299 Count | 419 Count | 76 Count | 0 VDC | 0 VDC |
| 1764926355 | 297 Count | 411 Count | 76 Count | 0 VDC | 0 VDC |
| 1764924172 | 296 Count | 409 Count | 76 Count | 0 VDC | 0 VDC |
| 1764922372 | 295 Count | 407 Count | 76 Count | 0 VDC | 0 VDC |
| 1764920571 | 294 Count | 398 Count | 76 Count | 0 VDC | 0 VDC |
| 1764918770 | 279 Count | 380 Count | 62 Count | 0 VDC | 0 VDC |
| 1764916970 | 278 Count | 379 Count | 62 Count | 0 VDC | 0 VDC |
| 1764915169 | 277 Count | 378 Count | 62 Count | 0 VDC | 0 VDC |
| 1764913368 | 276 Count | 377 Count | 62 Count | 0 VDC | 0 VDC |
| 1764909776 | 274 Count | 377 Count | 62 Count | 0 VDC | 0 VDC |
| 1764907975 | 273 Count | 376 Count | 62 Count | 0 VDC | 0 VDC |
| 1764906174 | 272 Count | 376 Count | 62 Count | 0 VDC | 0 VDC |
| 1764904373 | 271 Count | 371 Count | 62 Count | 0 VDC | 0 VDC |
| 1764900772 | 269 Count | 369 Count | 62 Count | 0 VDC | 0 VDC |
| 1764898971 | 268 Count | 368 Count | 62 Count | 0 VDC | 0 VDC |
| 1764897171 | 267 Count | 367 Count | 62 Count | 0 VDC | 0 VDC |
| 1764895370 | 266 Count | 366 Count | 62 Count | 0 VDC | 0 VDC |
| 1764893570 | 265 Count | 365 Count | 62 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)