This is the latest recevied telemetry packets stored in our database for station/object EA4ENG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785074077 | 757 Count | 514 Count | 506 Count | 3.96 VDC | 0 VDC |
| 1785072270 | 752 Count | 511 Count | 503 Count | 3.97 VDC | 0 VDC |
| 1785070462 | 745 Count | 506 Count | 498 Count | 3.95 VDC | 0 VDC |
| 1785068655 | 739 Count | 502 Count | 494 Count | 3.93 VDC | 0 VDC |
| 1785066833 | 733 Count | 498 Count | 490 Count | 3.84 VDC | 0 VDC |
| 1785066821 | 733 Count | 498 Count | 490 Count | 3.83 VDC | 0 VDC |
| 1785066800 | 733 Count | 498 Count | 490 Count | 3.83 VDC | 0 VDC |
| 1785040845 | 729 Count | 496 Count | 488 Count | 3.73 VDC | 0 VDC |
| 1785039037 | 725 Count | 494 Count | 486 Count | 3.74 VDC | 0 VDC |
| 1785037230 | 719 Count | 490 Count | 482 Count | 3.74 VDC | 0 VDC |
| 1785035423 | 715 Count | 488 Count | 480 Count | 3.74 VDC | 0 VDC |
| 1785033616 | 710 Count | 485 Count | 477 Count | 3.75 VDC | 0 VDC |
| 1785031808 | 704 Count | 481 Count | 473 Count | 3.75 VDC | 0 VDC |
| 1785030001 | 696 Count | 475 Count | 467 Count | 3.76 VDC | 0 VDC |
| 1785028194 | 690 Count | 471 Count | 463 Count | 3.76 VDC | 0 VDC |
| 1785026387 | 685 Count | 468 Count | 460 Count | 3.75 VDC | 0 VDC |
| 1785024579 | 682 Count | 467 Count | 459 Count | 3.78 VDC | 0 VDC |
| 1785022772 | 677 Count | 464 Count | 456 Count | 3.77 VDC | 0 VDC |
| 1785020965 | 673 Count | 462 Count | 454 Count | 3.79 VDC | 0 VDC |
| 1785019158 | 669 Count | 460 Count | 452 Count | 3.8 VDC | 0 VDC |
| 1785017350 | 665 Count | 458 Count | 450 Count | 3.81 VDC | 0 VDC |
| 1785015543 | 659 Count | 454 Count | 446 Count | 3.79 VDC | 0 VDC |
| 1785013736 | 641 Count | 438 Count | 430 Count | 3.82 VDC | 0 VDC |
| 1785011928 | 631 Count | 430 Count | 422 Count | 3.8 VDC | 0 VDC |
| 1785010121 | 624 Count | 425 Count | 417 Count | 3.83 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)