This is the latest recevied telemetry packets stored in our database for station/object IZ0IWD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777455773 | 971 Count | 267 Count | 9 Count | 3.69 VDC | 0.08 VDC |
| 1777454569 | 969 Count | 257 Count | 8 Count | 3.69 VDC | 0.08 VDC |
| 1777453365 | 967 Count | 251 Count | 7 Count | 3.69 VDC | 0.08 VDC |
| 1777452162 | 966 Count | 250 Count | 7 Count | 3.74 VDC | 0.08 VDC |
| 1777450958 | 962 Count | 245 Count | 4 Count | 3.75 VDC | 0.08 VDC |
| 1777448550 | 959 Count | 239 Count | 3 Count | 3.8 VDC | 0.08 VDC |
| 1777447346 | 957 Count | 237 Count | 2 Count | 3.8 VDC | 0.08 VDC |
| 1777446143 | 955 Count | 235 Count | 1 Count | 3.77 VDC | 0.08 VDC |
| 1777444939 | 953 Count | 231 Count | 0 Count | 3.74 VDC | 0.08 VDC |
| 1777443735 | 952 Count | 231 Count | 0 Count | 3.66 VDC | 0.08 VDC |
| 1777443656 | 947 Count | 231 Count | 0 Count | 2.82 VDC | 0.08 VDC |
| 1777443648 | 946 Count | 231 Count | 0 Count | 3.73 VDC | 0.08 VDC |
| 1777443365 | 940 Count | 231 Count | 0 Count | 3.68 VDC | 0.08 VDC |
| 1777442162 | 935 Count | 231 Count | 0 Count | 0.28 VDC | 0.08 VDC |
| 1777440958 | 930 Count | 231 Count | 0 Count | 0.28 VDC | 0.08 VDC |
| 1777439754 | 922 Count | 228 Count | 0 Count | 0.28 VDC | 0.08 VDC |
| 1777438550 | 916 Count | 228 Count | 0 Count | 0.28 VDC | 0.08 VDC |
| 1777437347 | 911 Count | 225 Count | 0 Count | 0.28 VDC | 0.08 VDC |
| 1777436143 | 907 Count | 225 Count | 0 Count | 0.28 VDC | 0.08 VDC |
| 1777434938 | 903 Count | 218 Count | 0 Count | 0.28 VDC | 0.08 VDC |
| 1777433735 | 882 Count | 216 Count | 0 Count | 0.28 VDC | 0.08 VDC |
| 1777432530 | 856 Count | 214 Count | 0 Count | 0.28 VDC | 0.08 VDC |
| 1777431326 | 842 Count | 212 Count | 0 Count | 0.28 VDC | 0.08 VDC |
| 1777430122 | 812 Count | 208 Count | 0 Count | 0.28 VDC | 0.08 VDC |
| 1777428918 | 788 Count | 202 Count | 0 Count | 0.28 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)