This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1772555200 | 207 Count | 190 Count | 138 Count | 0 VDC | 0 VDC |
| 1772551599 | 204 Count | 187 Count | 136 Count | 0 VDC | 0 VDC |
| 1772547998 | 201 Count | 184 Count | 134 Count | 0 VDC | 0 VDC |
| 1772544397 | 198 Count | 181 Count | 132 Count | 0 VDC | 0 VDC |
| 1772540799 | 195 Count | 178 Count | 130 Count | 0 VDC | 0 VDC |
| 1772537197 | 192 Count | 175 Count | 128 Count | 0 VDC | 0 VDC |
| 1772533596 | 189 Count | 172 Count | 126 Count | 0 VDC | 0 VDC |
| 1772526393 | 183 Count | 166 Count | 122 Count | 0 VDC | 0 VDC |
| 1772522790 | 180 Count | 163 Count | 120 Count | 0 VDC | 0 VDC |
| 1772519190 | 177 Count | 160 Count | 118 Count | 0 VDC | 0 VDC |
| 1772515589 | 174 Count | 157 Count | 116 Count | 0 VDC | 0 VDC |
| 1772511988 | 171 Count | 154 Count | 114 Count | 0 VDC | 0 VDC |
| 1772508387 | 168 Count | 151 Count | 112 Count | 0 VDC | 0 VDC |
| 1772504786 | 165 Count | 148 Count | 110 Count | 0 VDC | 0 VDC |
| 1772501185 | 162 Count | 145 Count | 108 Count | 0 VDC | 0 VDC |
| 1772497584 | 159 Count | 142 Count | 106 Count | 0 VDC | 0 VDC |
| 1772493983 | 156 Count | 139 Count | 104 Count | 0 VDC | 0 VDC |
| 1772490382 | 153 Count | 136 Count | 102 Count | 0 VDC | 0 VDC |
| 1772486781 | 150 Count | 133 Count | 100 Count | 0 VDC | 0 VDC |
| 1772483180 | 147 Count | 130 Count | 98 Count | 0 VDC | 0 VDC |
| 1772479579 | 144 Count | 127 Count | 96 Count | 0 VDC | 0 VDC |
| 1772475977 | 141 Count | 124 Count | 94 Count | 0 VDC | 0 VDC |
| 1772472376 | 138 Count | 121 Count | 92 Count | 0 VDC | 0 VDC |
| 1772468775 | 135 Count | 118 Count | 90 Count | 0 VDC | 0 VDC |
| 1772465173 | 132 Count | 116 Count | 88 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)