This is the latest recevied telemetry packets stored in our database for station/object SO9G-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770135866 | 27 Count | 467 Count | 25 Count | 0 VDC | 0 VDC |
| 1770134065 | 19 Count | 283 Count | 18 Count | 0 VDC | 0 VDC |
| 1770132272 | 11 Count | 143 Count | 11 Count | 0 VDC | 0 VDC |
| 1770130471 | 67 Count | 1043 Count | 60 Count | 0 VDC | 0 VDC |
| 1770128670 | 59 Count | 918 Count | 53 Count | 0 VDC | 0 VDC |
| 1770126870 | 52 Count | 788 Count | 47 Count | 0 VDC | 0 VDC |
| 1770125069 | 44 Count | 696 Count | 40 Count | 0 VDC | 0 VDC |
| 1770123269 | 37 Count | 581 Count | 34 Count | 0 VDC | 0 VDC |
| 1770121468 | 28 Count | 472 Count | 26 Count | 0 VDC | 0 VDC |
| 1770119668 | 21 Count | 351 Count | 20 Count | 0 VDC | 0 VDC |
| 1770117867 | 13 Count | 219 Count | 13 Count | 0 VDC | 0 VDC |
| 1770116066 | 64 Count | 1047 Count | 57 Count | 0 VDC | 0 VDC |
| 1770114266 | 58 Count | 907 Count | 52 Count | 0 VDC | 0 VDC |
| 1770112465 | 50 Count | 779 Count | 45 Count | 0 VDC | 0 VDC |
| 1770110674 | 43 Count | 672 Count | 39 Count | 0 VDC | 0 VDC |
| 1770108873 | 32 Count | 533 Count | 29 Count | 0 VDC | 0 VDC |
| 1770107073 | 24 Count | 410 Count | 22 Count | 0 VDC | 0 VDC |
| 1770105272 | 15 Count | 265 Count | 14 Count | 0 VDC | 0 VDC |
| 1770103471 | 7 Count | 138 Count | 7 Count | 0 VDC | 0 VDC |
| 1770101671 | 67 Count | 1079 Count | 60 Count | 0 VDC | 0 VDC |
| 1770099870 | 60 Count | 977 Count | 54 Count | 0 VDC | 0 VDC |
| 1770098070 | 52 Count | 845 Count | 47 Count | 0 VDC | 0 VDC |
| 1770096269 | 43 Count | 706 Count | 39 Count | 0 VDC | 0 VDC |
| 1770094468 | 37 Count | 563 Count | 34 Count | 0 VDC | 0 VDC |
| 1770092664 | 31 Count | 444 Count | 29 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)