This is the latest recevied telemetry packets stored in our database for station/object SR9EMP-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775263645 | 3 Count | 194 Count | 0 Count | 0 VDC | 0 VDC |
| 1775261844 | 25 Count | 1153 Count | 0 Count | 0 VDC | 0 VDC |
| 1775260044 | 19 Count | 859 Count | 0 Count | 0 VDC | 0 VDC |
| 1775258243 | 15 Count | 646 Count | 0 Count | 0 VDC | 0 VDC |
| 1775256442 | 8 Count | 438 Count | 0 Count | 0 VDC | 0 VDC |
| 1775254641 | 5 Count | 215 Count | 0 Count | 0 VDC | 0 VDC |
| 1775252840 | 24 Count | 1186 Count | 0 Count | 0 VDC | 0 VDC |
| 1775251040 | 20 Count | 973 Count | 0 Count | 0 VDC | 0 VDC |
| 1775249239 | 14 Count | 748 Count | 0 Count | 0 VDC | 0 VDC |
| 1775247438 | 10 Count | 551 Count | 0 Count | 0 VDC | 0 VDC |
| 1775245646 | 5 Count | 249 Count | 0 Count | 0 VDC | 0 VDC |
| 1775243845 | 23 Count | 1290 Count | 0 Count | 0 VDC | 0 VDC |
| 1775242044 | 19 Count | 992 Count | 0 Count | 0 VDC | 0 VDC |
| 1775240243 | 14 Count | 744 Count | 0 Count | 0 VDC | 0 VDC |
| 1775238443 | 8 Count | 487 Count | 0 Count | 0 VDC | 0 VDC |
| 1775236642 | 5 Count | 239 Count | 0 Count | 0 VDC | 0 VDC |
| 1775234841 | 26 Count | 1266 Count | 0 Count | 0 VDC | 0 VDC |
| 1775233040 | 22 Count | 947 Count | 0 Count | 0 VDC | 0 VDC |
| 1775231239 | 16 Count | 770 Count | 0 Count | 0 VDC | 0 VDC |
| 1775229438 | 11 Count | 516 Count | 0 Count | 0 VDC | 0 VDC |
| 1775227637 | 5 Count | 244 Count | 0 Count | 0 VDC | 0 VDC |
| 1775225837 | 0 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1775224044 | 13 Count | 749 Count | 0 Count | 0 VDC | 0 VDC |
| 1775222243 | 9 Count | 490 Count | 0 Count | 0 VDC | 0 VDC |
| 1775220442 | 3 Count | 231 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)