This is the latest recevied telemetry packets stored in our database for station/object SR9EMP-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793302750 | 11 Count | 1145 Count | 0 Count | 0 VDC | 0 VDC |
| 1793300939 | 9 Count | 936 Count | 0 Count | 0 VDC | 0 VDC |
| 1793299128 | 8 Count | 759 Count | 0 Count | 0 VDC | 0 VDC |
| 1793297317 | 7 Count | 598 Count | 0 Count | 0 VDC | 0 VDC |
| 1793295517 | 2 Count | 348 Count | 0 Count | 0 VDC | 0 VDC |
| 1793293706 | 0 Count | 142 Count | 0 Count | 0 VDC | 0 VDC |
| 1793291896 | 13 Count | 1038 Count | 0 Count | 0 VDC | 0 VDC |
| 1793290080 | 11 Count | 782 Count | 0 Count | 0 VDC | 0 VDC |
| 1793288354 | 5 Count | 491 Count | 0 Count | 0 VDC | 0 VDC |
| 1793286554 | 2 Count | 190 Count | 0 Count | 0 VDC | 0 VDC |
| 1793284733 | 58 Count | 1224 Count | 0 Count | 0 VDC | 0 VDC |
| 1793282933 | 15 Count | 940 Count | 0 Count | 0 VDC | 0 VDC |
| 1793281133 | 11 Count | 758 Count | 0 Count | 0 VDC | 0 VDC |
| 1793279321 | 10 Count | 611 Count | 0 Count | 0 VDC | 0 VDC |
| 1793277520 | 5 Count | 368 Count | 0 Count | 0 VDC | 0 VDC |
| 1793275720 | 1 Count | 198 Count | 0 Count | 0 VDC | 0 VDC |
| 1793273909 | 11 Count | 1155 Count | 0 Count | 0 VDC | 0 VDC |
| 1793272109 | 7 Count | 854 Count | 0 Count | 0 VDC | 0 VDC |
| 1793270298 | 5 Count | 697 Count | 0 Count | 0 VDC | 0 VDC |
| 1793268479 | 4 Count | 528 Count | 0 Count | 0 VDC | 0 VDC |
| 1793266760 | 2 Count | 380 Count | 0 Count | 0 VDC | 0 VDC |
| 1793264950 | 0 Count | 205 Count | 0 Count | 0 VDC | 0 VDC |
| 1793263133 | 14 Count | 1152 Count | 0 Count | 0 VDC | 0 VDC |
| 1793261318 | 13 Count | 928 Count | 0 Count | 0 VDC | 0 VDC |
| 1793259506 | 11 Count | 757 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)