This is the latest recevied telemetry packets stored in our database for station/object SQ5STR-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792530617 | 8 Count | 227 Count | 0 Count | 0 VDC | 0 VDC |
| 1792528816 | 7 Count | 194 Count | 0 Count | 0 VDC | 0 VDC |
| 1792527015 | 6 Count | 163 Count | 0 Count | 0 VDC | 0 VDC |
| 1792525215 | 5 Count | 133 Count | 0 Count | 0 VDC | 0 VDC |
| 1792523414 | 4 Count | 105 Count | 0 Count | 0 VDC | 0 VDC |
| 1792521613 | 3 Count | 80 Count | 0 Count | 0 VDC | 0 VDC |
| 1792519812 | 2 Count | 65 Count | 0 Count | 0 VDC | 0 VDC |
| 1792518011 | 1 Count | 41 Count | 0 Count | 0 VDC | 0 VDC |
| 1792516211 | 0 Count | 22 Count | 0 Count | 0 VDC | 0 VDC |
| 1792514410 | 369 Count | 1005 Count | 0 Count | 0 VDC | 0 VDC |
| 1792512609 | 368 Count | 983 Count | 0 Count | 0 VDC | 0 VDC |
| 1792510822 | 367 Count | 963 Count | 0 Count | 0 VDC | 0 VDC |
| 1792509021 | 349 Count | 933 Count | 0 Count | 0 VDC | 0 VDC |
| 1792507220 | 329 Count | 880 Count | 0 Count | 0 VDC | 0 VDC |
| 1792505419 | 302 Count | 840 Count | 0 Count | 0 VDC | 0 VDC |
| 1792503618 | 281 Count | 805 Count | 0 Count | 0 VDC | 0 VDC |
| 1792501817 | 257 Count | 768 Count | 0 Count | 0 VDC | 0 VDC |
| 1792500017 | 237 Count | 733 Count | 0 Count | 0 VDC | 0 VDC |
| 1792498215 | 218 Count | 698 Count | 0 Count | 0 VDC | 0 VDC |
| 1792496414 | 199 Count | 654 Count | 0 Count | 0 VDC | 0 VDC |
| 1792494613 | 181 Count | 605 Count | 0 Count | 0 VDC | 0 VDC |
| 1792492812 | 162 Count | 547 Count | 0 Count | 0 VDC | 0 VDC |
| 1792491012 | 147 Count | 473 Count | 0 Count | 0 VDC | 0 VDC |
| 1792489217 | 126 Count | 377 Count | 0 Count | 0 VDC | 0 VDC |
| 1792487416 | 106 Count | 270 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)