This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775155968 | 3 Count | 66 Count | 0 Count | 4.13 VDC | 1 VDC |
| 1775154168 | 1 Count | 24 Count | 0 Count | 4.13 VDC | 1 VDC |
| 1775152369 | 184 Count | 1005 Count | 0 Count | 4.13 VDC | 1 VDC |
| 1775150568 | 182 Count | 995 Count | 0 Count | 4.13 VDC | 2.66 VDC |
| 1775148768 | 180 Count | 984 Count | 0 Count | 4.13 VDC | 4.98 VDC |
| 1775146959 | 173 Count | 974 Count | 0 Count | 4.14 VDC | 5.1 VDC |
| 1775145161 | 171 Count | 961 Count | 0 Count | 4.15 VDC | 5.12 VDC |
| 1775143362 | 169 Count | 950 Count | 0 Count | 4.15 VDC | 5.12 VDC |
| 1775141562 | 167 Count | 939 Count | 0 Count | 4.15 VDC | 5.14 VDC |
| 1775139763 | 165 Count | 927 Count | 0 Count | 4.15 VDC | 5.14 VDC |
| 1775137964 | 163 Count | 869 Count | 0 Count | 4.15 VDC | 5.14 VDC |
| 1775136164 | 161 Count | 859 Count | 0 Count | 4.15 VDC | 5.14 VDC |
| 1775134365 | 159 Count | 843 Count | 0 Count | 4.15 VDC | 5.16 VDC |
| 1775132565 | 157 Count | 833 Count | 0 Count | 4.15 VDC | 5.14 VDC |
| 1775130766 | 155 Count | 822 Count | 0 Count | 4.15 VDC | 5.12 VDC |
| 1775128967 | 153 Count | 811 Count | 0 Count | 4.15 VDC | 5.16 VDC |
| 1775127168 | 151 Count | 801 Count | 0 Count | 4.15 VDC | 5.14 VDC |
| 1775125359 | 144 Count | 790 Count | 0 Count | 4.16 VDC | 5.14 VDC |
| 1775123560 | 142 Count | 773 Count | 0 Count | 4.17 VDC | 5.14 VDC |
| 1775121761 | 140 Count | 761 Count | 0 Count | 4.17 VDC | 5.14 VDC |
| 1775119960 | 138 Count | 750 Count | 0 Count | 4.17 VDC | 5.14 VDC |
| 1775118160 | 136 Count | 732 Count | 0 Count | 4.17 VDC | 5.14 VDC |
| 1775116360 | 134 Count | 723 Count | 0 Count | 4.2 VDC | 5.1 VDC |
| 1775114560 | 132 Count | 717 Count | 0 Count | 4.19 VDC | 5.08 VDC |
| 1775112758 | 130 Count | 701 Count | 0 Count | 4.15 VDC | 4.52 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)