This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1787097758 | 203 Count | 849 Count | 0 Count | 4.09 VDC | 1 VDC |
| 1787095957 | 201 Count | 840 Count | 0 Count | 4.09 VDC | 1 VDC |
| 1787094147 | 194 Count | 832 Count | 0 Count | 4.09 VDC | 1 VDC |
| 1787092348 | 192 Count | 823 Count | 0 Count | 4.09 VDC | 1 VDC |
| 1787090549 | 190 Count | 814 Count | 0 Count | 4.09 VDC | 1 VDC |
| 1787088750 | 188 Count | 805 Count | 0 Count | 4.09 VDC | 1 VDC |
| 1787086950 | 186 Count | 796 Count | 0 Count | 4.09 VDC | 1 VDC |
| 1787085150 | 184 Count | 787 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1787083351 | 182 Count | 773 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1787081552 | 180 Count | 741 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1787079753 | 178 Count | 732 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1787077953 | 176 Count | 722 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1787076155 | 174 Count | 713 Count | 0 Count | 4.1 VDC | 1.94 VDC |
| 1787074355 | 172 Count | 705 Count | 0 Count | 4.1 VDC | 4.4 VDC |
| 1787072545 | 165 Count | 697 Count | 0 Count | 4.1 VDC | 4.4 VDC |
| 1787070747 | 163 Count | 690 Count | 0 Count | 4.11 VDC | 5.12 VDC |
| 1787068947 | 161 Count | 681 Count | 0 Count | 4.11 VDC | 5.12 VDC |
| 1787067147 | 159 Count | 674 Count | 0 Count | 4.11 VDC | 5.12 VDC |
| 1787065346 | 157 Count | 665 Count | 0 Count | 4.11 VDC | 5.12 VDC |
| 1787063548 | 155 Count | 654 Count | 0 Count | 4.11 VDC | 5.14 VDC |
| 1787061749 | 153 Count | 640 Count | 0 Count | 4.11 VDC | 5.12 VDC |
| 1787059946 | 151 Count | 625 Count | 0 Count | 4.1 VDC | 5.12 VDC |
| 1787058144 | 149 Count | 618 Count | 0 Count | 4.1 VDC | 4.38 VDC |
| 1787056347 | 147 Count | 611 Count | 0 Count | 4.1 VDC | 4.38 VDC |
| 1787054546 | 145 Count | 604 Count | 0 Count | 4.1 VDC | 4.38 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)