This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775258590 | 142 Count | 814 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1775256791 | 140 Count | 805 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1775254982 | 133 Count | 795 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1775253182 | 131 Count | 780 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1775251383 | 129 Count | 768 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1775249582 | 127 Count | 757 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1775247783 | 125 Count | 745 Count | 0 Count | 4.08 VDC | 1 VDC |
| 1775245984 | 123 Count | 729 Count | 0 Count | 4.09 VDC | 1 VDC |
| 1775244185 | 121 Count | 717 Count | 0 Count | 4.09 VDC | 1 VDC |
| 1775242386 | 119 Count | 699 Count | 0 Count | 4.09 VDC | 1 VDC |
| 1775240586 | 117 Count | 688 Count | 0 Count | 4.09 VDC | 1 VDC |
| 1775238788 | 115 Count | 679 Count | 0 Count | 4.09 VDC | 1 VDC |
| 1775236989 | 113 Count | 668 Count | 0 Count | 4.09 VDC | 2.8 VDC |
| 1775235190 | 111 Count | 655 Count | 0 Count | 4.1 VDC | 4.38 VDC |
| 1775233382 | 104 Count | 645 Count | 0 Count | 4.1 VDC | 5.08 VDC |
| 1775231584 | 102 Count | 634 Count | 0 Count | 4.1 VDC | 5.1 VDC |
| 1775229786 | 100 Count | 625 Count | 0 Count | 4.1 VDC | 5.1 VDC |
| 1775227986 | 98 Count | 612 Count | 0 Count | 4.1 VDC | 5.1 VDC |
| 1775226187 | 96 Count | 601 Count | 0 Count | 4.11 VDC | 5.12 VDC |
| 1775224388 | 94 Count | 564 Count | 0 Count | 4.11 VDC | 5.12 VDC |
| 1775222589 | 92 Count | 550 Count | 0 Count | 4.11 VDC | 5.12 VDC |
| 1775220789 | 90 Count | 529 Count | 0 Count | 4.11 VDC | 5.1 VDC |
| 1775218988 | 88 Count | 512 Count | 0 Count | 4.11 VDC | 5.12 VDC |
| 1775217189 | 86 Count | 487 Count | 0 Count | 4.1 VDC | 5.1 VDC |
| 1775215389 | 84 Count | 475 Count | 0 Count | 4.11 VDC | 5.1 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)