This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1767204593 | 0 Count | 32 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1767202794 | 167 Count | 994 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1767200996 | 165 Count | 968 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1767199195 | 163 Count | 958 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1767197395 | 161 Count | 949 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1767197385 | 156 Count | 949 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1767195586 | 154 Count | 939 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1767193787 | 152 Count | 903 Count | 0 Count | 4.06 VDC | 1 VDC |
| 1767191988 | 150 Count | 876 Count | 0 Count | 4.06 VDC | 1.66 VDC |
| 1767190188 | 148 Count | 857 Count | 0 Count | 4.06 VDC | 4.36 VDC |
| 1767188389 | 146 Count | 826 Count | 0 Count | 4.06 VDC | 4.34 VDC |
| 1767186591 | 144 Count | 776 Count | 0 Count | 4.07 VDC | 4.34 VDC |
| 1767184791 | 142 Count | 767 Count | 0 Count | 4.07 VDC | 4.32 VDC |
| 1767182992 | 140 Count | 753 Count | 0 Count | 4.06 VDC | 4.34 VDC |
| 1767181193 | 138 Count | 743 Count | 0 Count | 4.07 VDC | 4.32 VDC |
| 1767179391 | 136 Count | 732 Count | 0 Count | 4.08 VDC | 4.34 VDC |
| 1767177593 | 134 Count | 722 Count | 0 Count | 4.06 VDC | 4.42 VDC |
| 1767173984 | 126 Count | 707 Count | 0 Count | 4.04 VDC | 4.32 VDC |
| 1767172186 | 124 Count | 699 Count | 0 Count | 4.04 VDC | 4.32 VDC |
| 1767170386 | 122 Count | 682 Count | 0 Count | 4.04 VDC | 4.34 VDC |
| 1767168587 | 120 Count | 673 Count | 0 Count | 4.04 VDC | 2.3 VDC |
| 1767166788 | 118 Count | 638 Count | 0 Count | 4.04 VDC | 4.34 VDC |
| 1767164989 | 116 Count | 630 Count | 0 Count | 4.04 VDC | 2.02 VDC |
| 1767163190 | 114 Count | 620 Count | 0 Count | 4.04 VDC | 1 VDC |
| 1767161391 | 112 Count | 605 Count | 0 Count | 4.04 VDC | 1 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)