This is the latest recevied telemetry packets stored in our database for station/object F4IZM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782074469 | 14 Count | 94 Count | 10 Count | 0 VDC | 0 VDC |
| 1782072664 | 11 Count | 72 Count | 8 Count | 0 VDC | 0 VDC |
| 1782070859 | 8 Count | 54 Count | 6 Count | 0 VDC | 0 VDC |
| 1782069054 | 5 Count | 35 Count | 4 Count | 0 VDC | 0 VDC |
| 1782067249 | 2 Count | 18 Count | 2 Count | 0 VDC | 0 VDC |
| 1782065444 | 194 Count | 1011 Count | 127 Count | 0 VDC | 0 VDC |
| 1782063639 | 191 Count | 996 Count | 125 Count | 0 VDC | 0 VDC |
| 1782061834 | 188 Count | 984 Count | 123 Count | 0 VDC | 0 VDC |
| 1782060029 | 185 Count | 970 Count | 121 Count | 0 VDC | 0 VDC |
| 1782058224 | 182 Count | 957 Count | 119 Count | 0 VDC | 0 VDC |
| 1782056419 | 179 Count | 945 Count | 117 Count | 0 VDC | 0 VDC |
| 1782054614 | 176 Count | 931 Count | 115 Count | 0 VDC | 0 VDC |
| 1782052809 | 173 Count | 917 Count | 113 Count | 0 VDC | 0 VDC |
| 1782051004 | 170 Count | 905 Count | 111 Count | 0 VDC | 0 VDC |
| 1782049199 | 167 Count | 893 Count | 109 Count | 0 VDC | 0 VDC |
| 1782047394 | 164 Count | 879 Count | 107 Count | 0 VDC | 0 VDC |
| 1782045589 | 161 Count | 867 Count | 105 Count | 0 VDC | 0 VDC |
| 1782043784 | 158 Count | 853 Count | 103 Count | 0 VDC | 0 VDC |
| 1782041979 | 155 Count | 839 Count | 101 Count | 0 VDC | 0 VDC |
| 1782040174 | 152 Count | 828 Count | 99 Count | 0 VDC | 0 VDC |
| 1782038369 | 149 Count | 814 Count | 97 Count | 0 VDC | 0 VDC |
| 1782036564 | 140 Count | 795 Count | 89 Count | 0 VDC | 0 VDC |
| 1782034759 | 137 Count | 783 Count | 87 Count | 0 VDC | 0 VDC |
| 1782032954 | 134 Count | 769 Count | 85 Count | 0 VDC | 0 VDC |
| 1782031149 | 131 Count | 754 Count | 83 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)