This is the latest recevied telemetry packets stored in our database for station/object SR2DTW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785295724 | 297 Count | 717 Count | 34 Count | 0 VDC | 0 VDC |
| 1785294044 | 295 Count | 710 Count | 33 Count | 0 VDC | 0 VDC |
| 1785292363 | 293 Count | 704 Count | 32 Count | 0 VDC | 0 VDC |
| 1785290682 | 292 Count | 699 Count | 32 Count | 0 VDC | 0 VDC |
| 1785289250 | 287 Count | 694 Count | 32 Count | 0 VDC | 0 VDC |
| 1785287570 | 285 Count | 681 Count | 31 Count | 0 VDC | 0 VDC |
| 1785285889 | 283 Count | 674 Count | 30 Count | 0 VDC | 0 VDC |
| 1785284208 | 281 Count | 667 Count | 29 Count | 0 VDC | 0 VDC |
| 1785282527 | 279 Count | 661 Count | 28 Count | 0 VDC | 0 VDC |
| 1785280846 | 277 Count | 657 Count | 27 Count | 0 VDC | 0 VDC |
| 1785279166 | 275 Count | 651 Count | 26 Count | 0 VDC | 0 VDC |
| 1785277485 | 273 Count | 646 Count | 25 Count | 0 VDC | 0 VDC |
| 1785275804 | 272 Count | 641 Count | 25 Count | 0 VDC | 0 VDC |
| 1785274123 | 270 Count | 636 Count | 24 Count | 0 VDC | 0 VDC |
| 1785272443 | 268 Count | 629 Count | 23 Count | 0 VDC | 0 VDC |
| 1785270762 | 266 Count | 624 Count | 22 Count | 0 VDC | 0 VDC |
| 1785269081 | 265 Count | 621 Count | 22 Count | 0 VDC | 0 VDC |
| 1785267649 | 260 Count | 621 Count | 22 Count | 0 VDC | 0 VDC |
| 1785265968 | 258 Count | 613 Count | 21 Count | 0 VDC | 0 VDC |
| 1785264288 | 256 Count | 608 Count | 20 Count | 0 VDC | 0 VDC |
| 1785262607 | 254 Count | 604 Count | 19 Count | 0 VDC | 0 VDC |
| 1785260926 | 253 Count | 602 Count | 19 Count | 0 VDC | 0 VDC |
| 1785259245 | 252 Count | 600 Count | 19 Count | 0 VDC | 0 VDC |
| 1785257565 | 251 Count | 600 Count | 19 Count | 0 VDC | 0 VDC |
| 1785255884 | 250 Count | 600 Count | 19 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)