This is the latest recevied telemetry packets stored in our database for station/object SP2RO-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792519669 | 240 Count | 929 Count | 75 Count | 2.11 VDC | 0 VDC |
| 1792518769 | 236 Count | 896 Count | 72 Count | 2.09 VDC | 0 VDC |
| 1792517868 | 235 Count | 874 Count | 72 Count | 2.1 VDC | 0 VDC |
| 1792516967 | 234 Count | 845 Count | 72 Count | 2.29 VDC | 0 VDC |
| 1792516066 | 233 Count | 819 Count | 72 Count | 2.27 VDC | 0 VDC |
| 1792515166 | 232 Count | 783 Count | 72 Count | 2.26 VDC | 0 VDC |
| 1792514265 | 231 Count | 764 Count | 72 Count | 2.29 VDC | 0 VDC |
| 1792513364 | 227 Count | 699 Count | 69 Count | 2.38 VDC | 0 VDC |
| 1792512463 | 226 Count | 666 Count | 69 Count | 2.24 VDC | 0 VDC |
| 1792511563 | 225 Count | 639 Count | 69 Count | 2.1 VDC | 0 VDC |
| 1792510662 | 224 Count | 617 Count | 69 Count | 2.34 VDC | 0 VDC |
| 1792509761 | 207 Count | 543 Count | 57 Count | 2.3 VDC | 0 VDC |
| 1792508860 | 190 Count | 488 Count | 57 Count | 2.21 VDC | 0 VDC |
| 1792507959 | 161 Count | 401 Count | 38 Count | 2.18 VDC | 0 VDC |
| 1792507058 | 137 Count | 333 Count | 25 Count | 2.58 VDC | 0 VDC |
| 1792506157 | 119 Count | 291 Count | 19 Count | 2.42 VDC | 0 VDC |
| 1792505256 | 104 Count | 239 Count | 17 Count | 2.2 VDC | 0 VDC |
| 1792504356 | 93 Count | 203 Count | 17 Count | 2.19 VDC | 0 VDC |
| 1792503455 | 82 Count | 184 Count | 17 Count | 2.23 VDC | 0 VDC |
| 1792502554 | 70 Count | 162 Count | 17 Count | 2.29 VDC | 0 VDC |
| 1792501653 | 55 Count | 132 Count | 17 Count | 2.14 VDC | 0 VDC |
| 1792500753 | 41 Count | 93 Count | 12 Count | 2.1 VDC | 0 VDC |
| 1792499852 | 19 Count | 48 Count | 0 Count | 2.22 VDC | 0 VDC |
| 1792498951 | 10 Count | 30 Count | 0 Count | 2.05 VDC | 0 VDC |
| 1792498050 | 325 Count | 1020 Count | 63 Count | 2.05 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)