This is the latest recevied telemetry packets stored in our database for station/object SP2RO-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765998816 | 192 Count | 899 Count | 159 Count | 1.35 VDC | 0 VDC |
| 1765997915 | 181 Count | 866 Count | 149 Count | 1.31 VDC | 0 VDC |
| 1765997014 | 174 Count | 839 Count | 144 Count | 1.28 VDC | 0 VDC |
| 1765996150 | 169 Count | 823 Count | 143 Count | 1.25 VDC | 0 VDC |
| 1765995249 | 167 Count | 807 Count | 142 Count | 1.28 VDC | 0 VDC |
| 1765994349 | 165 Count | 789 Count | 141 Count | 1.17 VDC | 0 VDC |
| 1765993448 | 146 Count | 744 Count | 123 Count | 1.37 VDC | 0 VDC |
| 1765992547 | 123 Count | 672 Count | 101 Count | 1.16 VDC | 0 VDC |
| 1765991646 | 113 Count | 620 Count | 92 Count | 1.25 VDC | 0 VDC |
| 1765990745 | 111 Count | 594 Count | 91 Count | 1.26 VDC | 0 VDC |
| 1765989844 | 109 Count | 578 Count | 90 Count | 1.42 VDC | 0 VDC |
| 1765988943 | 107 Count | 560 Count | 89 Count | 1.18 VDC | 0 VDC |
| 1765988042 | 105 Count | 539 Count | 88 Count | 1.26 VDC | 0 VDC |
| 1765987142 | 103 Count | 517 Count | 87 Count | 1.35 VDC | 0 VDC |
| 1765986241 | 101 Count | 488 Count | 86 Count | 1.43 VDC | 0 VDC |
| 1765985340 | 96 Count | 456 Count | 82 Count | 1.4 VDC | 0 VDC |
| 1765984439 | 94 Count | 442 Count | 81 Count | 1.2 VDC | 0 VDC |
| 1765983539 | 92 Count | 420 Count | 80 Count | 1.31 VDC | 0 VDC |
| 1765982638 | 90 Count | 404 Count | 79 Count | 1.4 VDC | 0 VDC |
| 1765981737 | 87 Count | 374 Count | 77 Count | 1.24 VDC | 0 VDC |
| 1765980836 | 75 Count | 314 Count | 66 Count | 1.26 VDC | 0 VDC |
| 1765979935 | 55 Count | 262 Count | 47 Count | 1.46 VDC | 0 VDC |
| 1765979035 | 44 Count | 237 Count | 37 Count | 1.33 VDC | 0 VDC |
| 1765978134 | 42 Count | 219 Count | 36 Count | 1.54 VDC | 0 VDC |
| 1765977233 | 40 Count | 202 Count | 35 Count | 1.36 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)