This is the latest recevied telemetry packets stored in our database for station/object SP2RO-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1767376799 | 24 Count | 236 Count | 18 Count | 1.53 VDC | 0 VDC |
| 1767375898 | 22 Count | 214 Count | 17 Count | 1.55 VDC | 0 VDC |
| 1767374997 | 20 Count | 185 Count | 16 Count | 1.5 VDC | 0 VDC |
| 1767374095 | 18 Count | 154 Count | 15 Count | 1.59 VDC | 0 VDC |
| 1767373194 | 16 Count | 124 Count | 14 Count | 1.41 VDC | 0 VDC |
| 1767372294 | 14 Count | 97 Count | 13 Count | 1.52 VDC | 0 VDC |
| 1767371393 | 7 Count | 41 Count | 7 Count | 1.52 VDC | 0 VDC |
| 1767370492 | 104 Count | 1012 Count | 56 Count | 1.44 VDC | 0 VDC |
| 1767369591 | 102 Count | 974 Count | 55 Count | 1.39 VDC | 0 VDC |
| 1767368691 | 100 Count | 951 Count | 54 Count | 1.51 VDC | 0 VDC |
| 1767367790 | 95 Count | 926 Count | 50 Count | 1.57 VDC | 0 VDC |
| 1767366889 | 93 Count | 904 Count | 49 Count | 1.48 VDC | 0 VDC |
| 1767365988 | 90 Count | 886 Count | 48 Count | 1.49 VDC | 0 VDC |
| 1767365088 | 88 Count | 866 Count | 47 Count | 1.61 VDC | 0 VDC |
| 1767364187 | 86 Count | 847 Count | 46 Count | 1.58 VDC | 0 VDC |
| 1767363286 | 84 Count | 826 Count | 45 Count | 1.49 VDC | 0 VDC |
| 1767362385 | 82 Count | 810 Count | 44 Count | 1.4 VDC | 0 VDC |
| 1767361485 | 80 Count | 788 Count | 43 Count | 1.5 VDC | 0 VDC |
| 1767360584 | 78 Count | 767 Count | 42 Count | 1.56 VDC | 0 VDC |
| 1767359683 | 76 Count | 744 Count | 41 Count | 1.66 VDC | 0 VDC |
| 1767358782 | 74 Count | 718 Count | 40 Count | 1.65 VDC | 0 VDC |
| 1767357882 | 71 Count | 676 Count | 38 Count | 1.46 VDC | 0 VDC |
| 1767356981 | 68 Count | 658 Count | 36 Count | 1.64 VDC | 0 VDC |
| 1767356080 | 66 Count | 630 Count | 35 Count | 1.49 VDC | 0 VDC |
| 1767355179 | 64 Count | 611 Count | 34 Count | 1.64 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)