This is the latest recevied telemetry packets stored in our database for station/object XE2ERA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792545708 | 46 Count | 73 Count | 35 Count | 3.96 VDC | 0.08 VDC |
| 1792544803 | 43 Count | 62 Count | 33 Count | 3.97 VDC | 0.08 VDC |
| 1792543899 | 39 Count | 48 Count | 30 Count | 3.97 VDC | 0.08 VDC |
| 1792542995 | 33 Count | 41 Count | 25 Count | 3.98 VDC | 0.08 VDC |
| 1792542091 | 30 Count | 34 Count | 23 Count | 3.97 VDC | 0.08 VDC |
| 1792541187 | 28 Count | 31 Count | 22 Count | 3.98 VDC | 0.08 VDC |
| 1792540286 | 25 Count | 29 Count | 20 Count | 3.98 VDC | 0.08 VDC |
| 1792539379 | 24 Count | 28 Count | 20 Count | 3.99 VDC | 0.08 VDC |
| 1792538475 | 21 Count | 26 Count | 18 Count | 3.99 VDC | 0.08 VDC |
| 1792537571 | 16 Count | 20 Count | 14 Count | 4 VDC | 0.08 VDC |
| 1792536667 | 10 Count | 13 Count | 9 Count | 4 VDC | 0.08 VDC |
| 1792535763 | 4 Count | 6 Count | 4 Count | 4.01 VDC | 0.08 VDC |
| 1792534859 | 522 Count | 1001 Count | 380 Count | 4 VDC | 0.08 VDC |
| 1792533955 | 517 Count | 994 Count | 376 Count | 4.01 VDC | 0.08 VDC |
| 1792533150 | 516 Count | 992 Count | 376 Count | 4.01 VDC | 0.08 VDC |
| 1792532245 | 515 Count | 992 Count | 376 Count | 4 VDC | 0.08 VDC |
| 1792531341 | 513 Count | 988 Count | 375 Count | 4.02 VDC | 0.08 VDC |
| 1792530437 | 510 Count | 981 Count | 373 Count | 4.02 VDC | 0.08 VDC |
| 1792529533 | 501 Count | 959 Count | 365 Count | 4 VDC | 0.08 VDC |
| 1792528628 | 498 Count | 955 Count | 363 Count | 4.02 VDC | 0.08 VDC |
| 1792527724 | 495 Count | 949 Count | 361 Count | 4.04 VDC | 0.08 VDC |
| 1792526820 | 493 Count | 944 Count | 360 Count | 4.02 VDC | 0.08 VDC |
| 1792525916 | 490 Count | 939 Count | 358 Count | 4.01 VDC | 0.08 VDC |
| 1792525012 | 486 Count | 924 Count | 355 Count | 4.02 VDC | 0.08 VDC |
| 1792524108 | 482 Count | 914 Count | 352 Count | 4.02 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)