This is the latest recevied telemetry packets stored in our database for station/object XE2ERA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794863915 | 303 Count | 604 Count | 199 Count | 3.92 VDC | 0.08 VDC |
| 1794863011 | 301 Count | 593 Count | 198 Count | 3.92 VDC | 0.08 VDC |
| 1794862107 | 300 Count | 593 Count | 198 Count | 3.93 VDC | 0.08 VDC |
| 1794861202 | 297 Count | 585 Count | 196 Count | 3.93 VDC | 0.08 VDC |
| 1794860298 | 294 Count | 581 Count | 194 Count | 3.93 VDC | 0.08 VDC |
| 1794859394 | 292 Count | 575 Count | 193 Count | 3.93 VDC | 0.08 VDC |
| 1794858490 | 289 Count | 571 Count | 191 Count | 3.94 VDC | 0.08 VDC |
| 1794857586 | 286 Count | 564 Count | 189 Count | 3.94 VDC | 0.08 VDC |
| 1794856682 | 283 Count | 545 Count | 187 Count | 3.94 VDC | 0.08 VDC |
| 1794855778 | 280 Count | 527 Count | 185 Count | 3.94 VDC | 0.08 VDC |
| 1794854874 | 275 Count | 521 Count | 181 Count | 3.93 VDC | 0.08 VDC |
| 1794853970 | 272 Count | 516 Count | 179 Count | 3.93 VDC | 0.08 VDC |
| 1794853066 | 269 Count | 512 Count | 177 Count | 3.92 VDC | 0.08 VDC |
| 1794852161 | 266 Count | 500 Count | 175 Count | 3.92 VDC | 0.08 VDC |
| 1794851257 | 263 Count | 492 Count | 173 Count | 3.91 VDC | 0.08 VDC |
| 1794850352 | 260 Count | 473 Count | 171 Count | 3.91 VDC | 0.08 VDC |
| 1794849448 | 257 Count | 468 Count | 169 Count | 3.92 VDC | 0.08 VDC |
| 1794848544 | 254 Count | 460 Count | 167 Count | 3.91 VDC | 0.08 VDC |
| 1794847640 | 251 Count | 454 Count | 165 Count | 3.91 VDC | 0.08 VDC |
| 1794846736 | 248 Count | 444 Count | 163 Count | 3.91 VDC | 0.08 VDC |
| 1794845832 | 245 Count | 440 Count | 161 Count | 3.91 VDC | 0.08 VDC |
| 1794844928 | 242 Count | 434 Count | 159 Count | 3.91 VDC | 0.08 VDC |
| 1794844024 | 239 Count | 430 Count | 157 Count | 3.91 VDC | 0.08 VDC |
| 1794843120 | 236 Count | 424 Count | 155 Count | 3.92 VDC | 0.08 VDC |
| 1794842313 | 233 Count | 420 Count | 153 Count | 3.9 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)