This is the latest recevied telemetry packets stored in our database for station/object XE2ERA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791535901 | 154 Count | 306 Count | 102 Count | 3.92 VDC | 0.08 VDC |
| 1791534996 | 148 Count | 298 Count | 97 Count | 3.92 VDC | 0.08 VDC |
| 1791534092 | 145 Count | 292 Count | 95 Count | 3.92 VDC | 0.08 VDC |
| 1791533188 | 142 Count | 285 Count | 93 Count | 3.92 VDC | 0.08 VDC |
| 1791532284 | 139 Count | 279 Count | 91 Count | 3.92 VDC | 0.08 VDC |
| 1791531380 | 136 Count | 273 Count | 89 Count | 3.92 VDC | 0.08 VDC |
| 1791530475 | 133 Count | 269 Count | 87 Count | 3.92 VDC | 0.08 VDC |
| 1791529571 | 130 Count | 262 Count | 85 Count | 3.92 VDC | 0.08 VDC |
| 1791528667 | 127 Count | 258 Count | 83 Count | 3.92 VDC | 0.08 VDC |
| 1791527766 | 124 Count | 251 Count | 81 Count | 3.93 VDC | 0.08 VDC |
| 1791526859 | 121 Count | 247 Count | 79 Count | 3.93 VDC | 0.08 VDC |
| 1791525955 | 118 Count | 243 Count | 77 Count | 3.93 VDC | 0.08 VDC |
| 1791525051 | 115 Count | 238 Count | 75 Count | 3.93 VDC | 0.08 VDC |
| 1791524146 | 112 Count | 231 Count | 73 Count | 3.94 VDC | 0.08 VDC |
| 1791523242 | 109 Count | 225 Count | 71 Count | 3.94 VDC | 0.08 VDC |
| 1791522338 | 106 Count | 219 Count | 69 Count | 3.94 VDC | 0.08 VDC |
| 1791521435 | 103 Count | 214 Count | 67 Count | 3.94 VDC | 0.08 VDC |
| 1791520530 | 100 Count | 209 Count | 65 Count | 3.93 VDC | 0.08 VDC |
| 1791519626 | 97 Count | 204 Count | 63 Count | 3.95 VDC | 0.08 VDC |
| 1791518723 | 94 Count | 197 Count | 61 Count | 3.96 VDC | 0.08 VDC |
| 1791517911 | 91 Count | 192 Count | 59 Count | 3.96 VDC | 0.08 VDC |
| 1791517006 | 88 Count | 187 Count | 57 Count | 3.94 VDC | 0.08 VDC |
| 1791516102 | 85 Count | 177 Count | 55 Count | 3.96 VDC | 0.08 VDC |
| 1791515198 | 82 Count | 172 Count | 53 Count | 3.96 VDC | 0.08 VDC |
| 1791514294 | 79 Count | 165 Count | 51 Count | 3.97 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)