This is the latest recevied telemetry packets stored in our database for station/object SP2SGK-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765494672 | 771 Count | 418 Count | 391 Count | 0 VDC | 0 VDC |
| 1765493771 | 769 Count | 416 Count | 390 Count | 0 VDC | 0 VDC |
| 1765492867 | 767 Count | 415 Count | 389 Count | 0 VDC | 0 VDC |
| 1765491968 | 765 Count | 414 Count | 388 Count | 0 VDC | 0 VDC |
| 1765491131 | 763 Count | 412 Count | 387 Count | 0 VDC | 0 VDC |
| 1765490228 | 760 Count | 410 Count | 385 Count | 0 VDC | 0 VDC |
| 1765489325 | 758 Count | 409 Count | 384 Count | 0 VDC | 0 VDC |
| 1765488422 | 756 Count | 407 Count | 383 Count | 0 VDC | 0 VDC |
| 1765487519 | 754 Count | 406 Count | 382 Count | 0 VDC | 0 VDC |
| 1765486616 | 752 Count | 405 Count | 381 Count | 0 VDC | 0 VDC |
| 1765485713 | 750 Count | 404 Count | 380 Count | 0 VDC | 0 VDC |
| 1765484810 | 748 Count | 403 Count | 379 Count | 0 VDC | 0 VDC |
| 1765483907 | 746 Count | 401 Count | 378 Count | 0 VDC | 0 VDC |
| 1765483004 | 744 Count | 400 Count | 377 Count | 0 VDC | 0 VDC |
| 1765482101 | 742 Count | 399 Count | 376 Count | 0 VDC | 0 VDC |
| 1765481198 | 738 Count | 396 Count | 373 Count | 0 VDC | 0 VDC |
| 1765480295 | 736 Count | 395 Count | 372 Count | 0 VDC | 0 VDC |
| 1765479392 | 734 Count | 394 Count | 371 Count | 0 VDC | 0 VDC |
| 1765478490 | 732 Count | 393 Count | 370 Count | 0 VDC | 0 VDC |
| 1765477586 | 730 Count | 392 Count | 369 Count | 0 VDC | 0 VDC |
| 1765476683 | 727 Count | 390 Count | 367 Count | 0 VDC | 0 VDC |
| 1765475780 | 725 Count | 388 Count | 366 Count | 0 VDC | 0 VDC |
| 1765474878 | 723 Count | 386 Count | 365 Count | 0 VDC | 0 VDC |
| 1765473975 | 720 Count | 384 Count | 363 Count | 0 VDC | 0 VDC |
| 1765473072 | 718 Count | 383 Count | 362 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)