APRS Track Direct

My position About ☰

reset

OK2PYA-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK2PYA-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*
1788120208	688 Count	187 Count	126 Count
1788118281	686 Count	187 Count	126 Count
1788116355	684 Count	187 Count	126 Count
1788114428	682 Count	187 Count	126 Count
1788112501	680 Count	187 Count	126 Count
1788112094	679 Count	187 Count	126 Count
1788110167	677 Count	187 Count	126 Count
1788108241	675 Count	187 Count	126 Count
1788106314	673 Count	187 Count	126 Count
1788104387	671 Count	187 Count	126 Count
1788102460	669 Count	187 Count	126 Count
1788100534	667 Count	187 Count	126 Count
1788098607	644 Count	166 Count	105 Count
1788096680	642 Count	166 Count	105 Count
1788094753	640 Count	166 Count	105 Count
1788092827	638 Count	166 Count	105 Count
1788090900	636 Count	166 Count	105 Count
1788090495	635 Count	166 Count	105 Count
1788088568	617 Count	150 Count	89 Count
1788086641	615 Count	150 Count	89 Count
1788084715	613 Count	150 Count	89 Count
1788082788	611 Count	150 Count	89 Count
1788080861	609 Count	150 Count	89 Count
1788078934	607 Count	150 Count	89 Count
1788077008	605 Count	150 Count	89 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time: