This is the latest recevied telemetry packets stored in our database for station/object SP2LMK-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1794962454 | 182 Count | 266 Count | 170 Count | 0 VDC | 0 VDC |
| 1794960654 | 179 Count | 242 Count | 168 Count | 0 VDC | 0 VDC |
| 1794958853 | 176 Count | 230 Count | 166 Count | 0 VDC | 0 VDC |
| 1794957052 | 148 Count | 192 Count | 139 Count | 0 VDC | 0 VDC |
| 1794955251 | 132 Count | 172 Count | 124 Count | 0 VDC | 0 VDC |
| 1794953450 | 128 Count | 161 Count | 121 Count | 0 VDC | 0 VDC |
| 1794951650 | 108 Count | 134 Count | 102 Count | 0 VDC | 0 VDC |
| 1794949849 | 76 Count | 100 Count | 71 Count | 0 VDC | 0 VDC |
| 1794948048 | 68 Count | 90 Count | 64 Count | 0 VDC | 0 VDC |
| 1794946255 | 63 Count | 81 Count | 60 Count | 0 VDC | 0 VDC |
| 1794944454 | 50 Count | 64 Count | 48 Count | 0 VDC | 0 VDC |
| 1794942653 | 47 Count | 57 Count | 46 Count | 0 VDC | 0 VDC |
| 1794940853 | 30 Count | 37 Count | 30 Count | 0 VDC | 0 VDC |
| 1794939052 | 174 Count | 1017 Count | 106 Count | 0 VDC | 0 VDC |
| 1794937251 | 158 Count | 999 Count | 91 Count | 0 VDC | 0 VDC |
| 1794935450 | 117 Count | 958 Count | 51 Count | 0 VDC | 0 VDC |
| 1794933650 | 95 Count | 930 Count | 30 Count | 0 VDC | 0 VDC |
| 1794931849 | 84 Count | 916 Count | 20 Count | 0 VDC | 0 VDC |
| 1794930048 | 81 Count | 910 Count | 18 Count | 0 VDC | 0 VDC |
| 1794926446 | 75 Count | 900 Count | 14 Count | 0 VDC | 0 VDC |
| 1794924654 | 72 Count | 892 Count | 12 Count | 0 VDC | 0 VDC |
| 1794922853 | 71 Count | 882 Count | 12 Count | 0 VDC | 0 VDC |
| 1794921052 | 70 Count | 868 Count | 12 Count | 0 VDC | 0 VDC |
| 1794919252 | 69 Count | 850 Count | 12 Count | 0 VDC | 0 VDC |
| 1794917451 | 68 Count | 825 Count | 12 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)