This is the latest recevied telemetry packets stored in our database for station/object SP2OSA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766008759 | 355 Count | 252 Count | 87 Count | 0 VDC | 0 VDC |
| 1766007858 | 354 Count | 252 Count | 87 Count | 0 VDC | 0 VDC |
| 1766006957 | 353 Count | 252 Count | 87 Count | 0 VDC | 0 VDC |
| 1766006056 | 352 Count | 251 Count | 87 Count | 0 VDC | 0 VDC |
| 1766005176 | 351 Count | 251 Count | 87 Count | 0 VDC | 0 VDC |
| 1766004275 | 350 Count | 251 Count | 87 Count | 0 VDC | 0 VDC |
| 1766003374 | 348 Count | 249 Count | 86 Count | 0 VDC | 0 VDC |
| 1766002472 | 346 Count | 247 Count | 85 Count | 0 VDC | 0 VDC |
| 1766001572 | 345 Count | 245 Count | 85 Count | 0 VDC | 0 VDC |
| 1766000671 | 344 Count | 243 Count | 85 Count | 0 VDC | 0 VDC |
| 1765999770 | 342 Count | 240 Count | 84 Count | 0 VDC | 0 VDC |
| 1765998869 | 340 Count | 239 Count | 83 Count | 0 VDC | 0 VDC |
| 1765997968 | 338 Count | 230 Count | 82 Count | 0 VDC | 0 VDC |
| 1765997067 | 336 Count | 227 Count | 81 Count | 0 VDC | 0 VDC |
| 1765996167 | 334 Count | 226 Count | 80 Count | 0 VDC | 0 VDC |
| 1765995266 | 332 Count | 224 Count | 79 Count | 0 VDC | 0 VDC |
| 1765994365 | 330 Count | 222 Count | 78 Count | 0 VDC | 0 VDC |
| 1765993464 | 329 Count | 218 Count | 78 Count | 0 VDC | 0 VDC |
| 1765992563 | 328 Count | 217 Count | 78 Count | 0 VDC | 0 VDC |
| 1765991662 | 327 Count | 217 Count | 78 Count | 0 VDC | 0 VDC |
| 1765990762 | 325 Count | 212 Count | 77 Count | 0 VDC | 0 VDC |
| 1765989861 | 322 Count | 209 Count | 75 Count | 0 VDC | 0 VDC |
| 1765988960 | 320 Count | 207 Count | 74 Count | 0 VDC | 0 VDC |
| 1765988059 | 318 Count | 206 Count | 73 Count | 0 VDC | 0 VDC |
| 1765987158 | 316 Count | 205 Count | 72 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)