This is the latest recevied telemetry packets stored in our database for station/object SP6RGZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775183280 | 490 Count | 288 Count | 288 Count | 0 VDC | 0 VDC |
| 1775181479 | 488 Count | 287 Count | 287 Count | 0 VDC | 0 VDC |
| 1775179679 | 486 Count | 286 Count | 286 Count | 0 VDC | 0 VDC |
| 1775177878 | 485 Count | 286 Count | 286 Count | 0 VDC | 0 VDC |
| 1775176077 | 483 Count | 285 Count | 285 Count | 0 VDC | 0 VDC |
| 1775174277 | 481 Count | 284 Count | 284 Count | 0 VDC | 0 VDC |
| 1775172476 | 479 Count | 283 Count | 283 Count | 0 VDC | 0 VDC |
| 1775170675 | 477 Count | 282 Count | 282 Count | 0 VDC | 0 VDC |
| 1775168874 | 475 Count | 281 Count | 281 Count | 0 VDC | 0 VDC |
| 1775167082 | 474 Count | 281 Count | 281 Count | 0 VDC | 0 VDC |
| 1775165281 | 472 Count | 280 Count | 280 Count | 0 VDC | 0 VDC |
| 1775163480 | 470 Count | 279 Count | 279 Count | 0 VDC | 0 VDC |
| 1775161680 | 468 Count | 278 Count | 278 Count | 0 VDC | 0 VDC |
| 1775159879 | 466 Count | 277 Count | 277 Count | 0 VDC | 0 VDC |
| 1775158078 | 464 Count | 276 Count | 276 Count | 0 VDC | 0 VDC |
| 1775156277 | 462 Count | 275 Count | 275 Count | 0 VDC | 0 VDC |
| 1775152676 | 458 Count | 273 Count | 273 Count | 0 VDC | 0 VDC |
| 1775150875 | 456 Count | 272 Count | 272 Count | 0 VDC | 0 VDC |
| 1775149075 | 454 Count | 271 Count | 271 Count | 0 VDC | 0 VDC |
| 1775147274 | 452 Count | 270 Count | 270 Count | 0 VDC | 0 VDC |
| 1775145480 | 450 Count | 269 Count | 269 Count | 0 VDC | 0 VDC |
| 1775143680 | 448 Count | 268 Count | 268 Count | 0 VDC | 0 VDC |
| 1775141879 | 446 Count | 267 Count | 267 Count | 0 VDC | 0 VDC |
| 1775140078 | 445 Count | 267 Count | 267 Count | 0 VDC | 0 VDC |
| 1775138277 | 443 Count | 266 Count | 266 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)