This is the latest recevied telemetry packets stored in our database for station/object SP6RGZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775012275 | 312 Count | 205 Count | 205 Count | 0 VDC | 0 VDC |
| 1775010475 | 310 Count | 204 Count | 204 Count | 0 VDC | 0 VDC |
| 1775008674 | 308 Count | 203 Count | 203 Count | 0 VDC | 0 VDC |
| 1775006873 | 306 Count | 202 Count | 202 Count | 0 VDC | 0 VDC |
| 1775005072 | 304 Count | 201 Count | 201 Count | 0 VDC | 0 VDC |
| 1775003272 | 302 Count | 200 Count | 200 Count | 0 VDC | 0 VDC |
| 1775001471 | 300 Count | 199 Count | 199 Count | 0 VDC | 0 VDC |
| 1774994276 | 292 Count | 195 Count | 195 Count | 0 VDC | 0 VDC |
| 1774992475 | 290 Count | 194 Count | 194 Count | 0 VDC | 0 VDC |
| 1774990675 | 288 Count | 193 Count | 193 Count | 0 VDC | 0 VDC |
| 1774988874 | 286 Count | 192 Count | 192 Count | 0 VDC | 0 VDC |
| 1774987073 | 284 Count | 191 Count | 191 Count | 0 VDC | 0 VDC |
| 1774985272 | 282 Count | 190 Count | 190 Count | 0 VDC | 0 VDC |
| 1774983472 | 280 Count | 189 Count | 189 Count | 0 VDC | 0 VDC |
| 1774981671 | 278 Count | 188 Count | 188 Count | 0 VDC | 0 VDC |
| 1774979870 | 276 Count | 187 Count | 187 Count | 0 VDC | 0 VDC |
| 1774978069 | 272 Count | 184 Count | 184 Count | 0 VDC | 0 VDC |
| 1774976269 | 267 Count | 180 Count | 180 Count | 0 VDC | 0 VDC |
| 1774974468 | 265 Count | 179 Count | 179 Count | 0 VDC | 0 VDC |
| 1774972675 | 263 Count | 178 Count | 178 Count | 0 VDC | 0 VDC |
| 1774970874 | 262 Count | 178 Count | 178 Count | 0 VDC | 0 VDC |
| 1774969073 | 260 Count | 177 Count | 177 Count | 0 VDC | 0 VDC |
| 1774967272 | 258 Count | 176 Count | 176 Count | 0 VDC | 0 VDC |
| 1774965472 | 256 Count | 175 Count | 175 Count | 0 VDC | 0 VDC |
| 1774963671 | 254 Count | 174 Count | 174 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)