This is the latest recevied telemetry packets stored in our database for station/object BG2VZP-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Pres* | Volt* | A5* |
|---|---|---|---|---|---|
| 1732238906 | 9 | 16.7 C | 1019 hPa | 11.46 V | 0 |
| 1732235888 | 8 | 16.1 C | 1019 hPa | 11.49 V | 0 |
| 1732232781 | 8 | 15.9 C | 1018 hPa | 11.49 V | 0 |
| 1732229767 | 8 | 15.2 C | 1018 hPa | 11.49 V | 0 |
| 1732226757 | 9 | 14.8 C | 1017 hPa | 11.46 V | 0 |
| 1732223746 | 7 | 14.7 C | 1017 hPa | 11.49 V | 0 |
| 1732220737 | 7 | 15.3 C | 1016 hPa | 11.46 V | 0 |
| 1732217727 | 12 | 15.5 C | 1016 hPa | 11.46 V | 0 |
| 1732214717 | 10 | 16.2 C | 1016 hPa | 11.46 V | 0 |
| 1732211707 | 10 | 16.6 C | 1016 hPa | 11.46 V | 0 |
| 1732208700 | 10 | 16.9 C | 1015 hPa | 11.46 V | 0 |
| 1732205690 | 10 | 16.7 C | 1015 hPa | 11.49 V | 0 |
| 1732202681 | 8 | 16.2 C | 1015 hPa | 11.49 V | 0 |
| 1732199665 | 9 | 16.3 C | 1015 hPa | 11.49 V | 0 |
| 1732196655 | 11 | 16.3 C | 1015 hPa | 11.46 V | 0 |
| 1732193648 | 7 | 16.6 C | 1014 hPa | 11.49 V | 0 |
| 1732190635 | 10 | 16.9 C | 1014 hPa | 11.46 V | 0 |
| 1732187622 | 9 | 17.3 C | 1013 hPa | 11.46 V | 0 |
| 1732184613 | 10 | 17.3 C | 1013 hPa | 11.49 V | 0 |
| 1732181584 | 9 | 17.6 C | 1012 hPa | 11.46 V | 0 |
| 1732178557 | 9 | 18 C | 1011 hPa | 11.49 V | 0 |
| 1732172515 | 9 | 19.4 C | 1010 hPa | 11.49 V | 0 |
| 1732166497 | 8 | 28.8 C | 1009 hPa | 11.49 V | 0 |
| 1732160481 | 8 | 28.3 C | 1009 hPa | 11.49 V | 0 |
| 1732157467 | 8 | 24.8 C | 1009 hPa | 11.49 V | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, 0
Pres: 0, 1, 0
Volt: 0, 0.01, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)