This is the latest recevied telemetry packets stored in our database for station/object SQ2MO-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770185115 | 155 Count | 872 Count | 89 Count | 0 VDC | 0 VDC |
| 1770183925 | 148 Count | 830 Count | 87 Count | 0 VDC | 0 VDC |
| 1770182724 | 142 Count | 800 Count | 83 Count | 0 VDC | 0 VDC |
| 1770181523 | 137 Count | 780 Count | 80 Count | 0 VDC | 0 VDC |
| 1770180323 | 133 Count | 756 Count | 77 Count | 0 VDC | 0 VDC |
| 1770179122 | 127 Count | 731 Count | 73 Count | 0 VDC | 0 VDC |
| 1770177921 | 122 Count | 715 Count | 70 Count | 0 VDC | 0 VDC |
| 1770176721 | 119 Count | 697 Count | 68 Count | 0 VDC | 0 VDC |
| 1770175520 | 115 Count | 668 Count | 66 Count | 0 VDC | 0 VDC |
| 1770174319 | 110 Count | 647 Count | 63 Count | 0 VDC | 0 VDC |
| 1770173119 | 106 Count | 628 Count | 60 Count | 0 VDC | 0 VDC |
| 1770171918 | 100 Count | 604 Count | 56 Count | 0 VDC | 0 VDC |
| 1770170718 | 95 Count | 584 Count | 53 Count | 0 VDC | 0 VDC |
| 1770168316 | 85 Count | 531 Count | 46 Count | 0 VDC | 0 VDC |
| 1770167116 | 80 Count | 510 Count | 43 Count | 0 VDC | 0 VDC |
| 1770165915 | 77 Count | 488 Count | 41 Count | 0 VDC | 0 VDC |
| 1770164715 | 74 Count | 463 Count | 40 Count | 0 VDC | 0 VDC |
| 1770163514 | 70 Count | 441 Count | 38 Count | 0 VDC | 0 VDC |
| 1770162323 | 63 Count | 422 Count | 36 Count | 0 VDC | 0 VDC |
| 1770161123 | 59 Count | 373 Count | 34 Count | 0 VDC | 0 VDC |
| 1770159922 | 55 Count | 344 Count | 32 Count | 0 VDC | 0 VDC |
| 1770158721 | 52 Count | 322 Count | 30 Count | 0 VDC | 0 VDC |
| 1770157521 | 48 Count | 298 Count | 28 Count | 0 VDC | 0 VDC |
| 1770156320 | 38 Count | 260 Count | 20 Count | 0 VDC | 0 VDC |
| 1770155120 | 33 Count | 214 Count | 16 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)