This is the latest recevied telemetry packets stored in our database for station/object SQ2MO-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765998913 | 126 Count | 1003 Count | 45 Count | 0 VDC | 0 VDC |
| 1765997712 | 125 Count | 977 Count | 45 Count | 0 VDC | 0 VDC |
| 1765996512 | 124 Count | 958 Count | 45 Count | 0 VDC | 0 VDC |
| 1765995311 | 123 Count | 950 Count | 45 Count | 0 VDC | 0 VDC |
| 1765994111 | 122 Count | 940 Count | 45 Count | 0 VDC | 0 VDC |
| 1765992910 | 103 Count | 879 Count | 27 Count | 0 VDC | 0 VDC |
| 1765991709 | 96 Count | 855 Count | 21 Count | 0 VDC | 0 VDC |
| 1765990509 | 95 Count | 847 Count | 21 Count | 0 VDC | 0 VDC |
| 1765989308 | 94 Count | 838 Count | 21 Count | 0 VDC | 0 VDC |
| 1765988108 | 93 Count | 829 Count | 21 Count | 0 VDC | 0 VDC |
| 1765986917 | 88 Count | 822 Count | 21 Count | 0 VDC | 0 VDC |
| 1765985717 | 87 Count | 811 Count | 21 Count | 0 VDC | 0 VDC |
| 1765984516 | 86 Count | 802 Count | 21 Count | 0 VDC | 0 VDC |
| 1765983315 | 85 Count | 790 Count | 21 Count | 0 VDC | 0 VDC |
| 1765982115 | 83 Count | 782 Count | 20 Count | 0 VDC | 0 VDC |
| 1765980914 | 82 Count | 745 Count | 20 Count | 0 VDC | 0 VDC |
| 1765979714 | 81 Count | 717 Count | 20 Count | 0 VDC | 0 VDC |
| 1765978513 | 80 Count | 705 Count | 20 Count | 0 VDC | 0 VDC |
| 1765977312 | 79 Count | 694 Count | 20 Count | 0 VDC | 0 VDC |
| 1765976112 | 78 Count | 687 Count | 20 Count | 0 VDC | 0 VDC |
| 1765974911 | 77 Count | 678 Count | 20 Count | 0 VDC | 0 VDC |
| 1765973711 | 76 Count | 669 Count | 20 Count | 0 VDC | 0 VDC |
| 1765972510 | 71 Count | 634 Count | 16 Count | 0 VDC | 0 VDC |
| 1765971309 | 65 Count | 570 Count | 11 Count | 0 VDC | 0 VDC |
| 1765970109 | 64 Count | 560 Count | 11 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)