This is the latest recevied telemetry packets stored in our database for station/object SQ2MO-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793315807 | 434 Count | 947 Count | 43 Count | 0 VDC | 0 VDC |
| 1793314606 | 433 Count | 937 Count | 43 Count | 0 VDC | 0 VDC |
| 1793313405 | 432 Count | 929 Count | 43 Count | 0 VDC | 0 VDC |
| 1793312205 | 431 Count | 926 Count | 43 Count | 0 VDC | 0 VDC |
| 1793311004 | 430 Count | 920 Count | 43 Count | 0 VDC | 0 VDC |
| 1793309803 | 429 Count | 916 Count | 43 Count | 0 VDC | 0 VDC |
| 1793308603 | 428 Count | 913 Count | 43 Count | 0 VDC | 0 VDC |
| 1793307402 | 427 Count | 907 Count | 43 Count | 0 VDC | 0 VDC |
| 1793306202 | 426 Count | 903 Count | 43 Count | 0 VDC | 0 VDC |
| 1793305001 | 425 Count | 900 Count | 43 Count | 0 VDC | 0 VDC |
| 1793303800 | 181 Count | 894 Count | 43 Count | 0 VDC | 0 VDC |
| 1793302600 | 180 Count | 890 Count | 43 Count | 0 VDC | 0 VDC |
| 1793301399 | 179 Count | 888 Count | 43 Count | 0 VDC | 0 VDC |
| 1793300209 | 174 Count | 882 Count | 43 Count | 0 VDC | 0 VDC |
| 1793299009 | 173 Count | 878 Count | 43 Count | 0 VDC | 0 VDC |
| 1793297808 | 172 Count | 875 Count | 43 Count | 0 VDC | 0 VDC |
| 1793296607 | 171 Count | 866 Count | 43 Count | 0 VDC | 0 VDC |
| 1793294206 | 169 Count | 859 Count | 43 Count | 0 VDC | 0 VDC |
| 1793293006 | 168 Count | 853 Count | 43 Count | 0 VDC | 0 VDC |
| 1793291805 | 167 Count | 841 Count | 43 Count | 0 VDC | 0 VDC |
| 1793290604 | 154 Count | 803 Count | 31 Count | 0 VDC | 0 VDC |
| 1793289404 | 153 Count | 790 Count | 31 Count | 0 VDC | 0 VDC |
| 1793288203 | 152 Count | 787 Count | 31 Count | 0 VDC | 0 VDC |
| 1793287003 | 151 Count | 784 Count | 31 Count | 0 VDC | 0 VDC |
| 1793285802 | 150 Count | 780 Count | 31 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)