This is the latest recevied telemetry packets stored in our database for station/object EA4ATS-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775156879 | 9 Count | 563 Count | 0 Count | 0 VDC | 0 VDC |
| 1775155113 | 8 Count | 521 Count | 0 Count | 0 VDC | 0 VDC |
| 1775153310 | 7 Count | 474 Count | 0 Count | 0 VDC | 0 VDC |
| 1775151508 | 6 Count | 430 Count | 0 Count | 0 VDC | 0 VDC |
| 1775149704 | 5 Count | 364 Count | 0 Count | 0 VDC | 0 VDC |
| 1775147900 | 4 Count | 304 Count | 0 Count | 0 VDC | 0 VDC |
| 1775146097 | 3 Count | 251 Count | 0 Count | 0 VDC | 0 VDC |
| 1775144294 | 2 Count | 195 Count | 0 Count | 0 VDC | 0 VDC |
| 1775142491 | 1 Count | 131 Count | 0 Count | 0 VDC | 0 VDC |
| 1775140688 | 0 Count | 72 Count | 0 Count | 0 VDC | 0 VDC |
| 1775138884 | 18 Count | 1043 Count | 0 Count | 0 VDC | 0 VDC |
| 1775137081 | 17 Count | 969 Count | 0 Count | 0 VDC | 0 VDC |
| 1775135278 | 16 Count | 924 Count | 0 Count | 0 VDC | 0 VDC |
| 1775133514 | 15 Count | 876 Count | 0 Count | 0 VDC | 0 VDC |
| 1775131711 | 14 Count | 832 Count | 0 Count | 0 VDC | 0 VDC |
| 1775129908 | 13 Count | 790 Count | 0 Count | 0 VDC | 0 VDC |
| 1775128105 | 12 Count | 738 Count | 0 Count | 0 VDC | 0 VDC |
| 1775126301 | 11 Count | 646 Count | 0 Count | 0 VDC | 0 VDC |
| 1775124498 | 10 Count | 590 Count | 0 Count | 0 VDC | 0 VDC |
| 1775122695 | 9 Count | 533 Count | 0 Count | 0 VDC | 0 VDC |
| 1775120892 | 8 Count | 489 Count | 0 Count | 0 VDC | 0 VDC |
| 1775119089 | 7 Count | 449 Count | 0 Count | 0 VDC | 0 VDC |
| 1775117285 | 6 Count | 379 Count | 0 Count | 0 VDC | 0 VDC |
| 1775115482 | 5 Count | 326 Count | 0 Count | 0 VDC | 0 VDC |
| 1775113679 | 4 Count | 262 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)