This is the latest recevied telemetry packets stored in our database for station/object SP8AA-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783152901 | 948 Count | 810 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1783152718 | 947 Count | 807 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1783152535 | 946 Count | 805 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1783152352 | 945 Count | 805 Count | 0 Count | 4.18 VDC | 0.14 VDC |
| 1783152170 | 944 Count | 804 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1783151987 | 943 Count | 803 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1783151804 | 942 Count | 801 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1783151621 | 941 Count | 799 Count | 0 Count | 4.16 VDC | 0.14 VDC |
| 1783151438 | 940 Count | 791 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1783151255 | 939 Count | 787 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1783151072 | 938 Count | 785 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1783150890 | 937 Count | 784 Count | 0 Count | 4.27 VDC | 0.14 VDC |
| 1783150707 | 936 Count | 784 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1783150524 | 935 Count | 783 Count | 0 Count | 4.22 VDC | 0.14 VDC |
| 1783150341 | 934 Count | 783 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1783150158 | 933 Count | 782 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1783149975 | 932 Count | 782 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1783149792 | 931 Count | 781 Count | 0 Count | 4.24 VDC | 0.14 VDC |
| 1783149610 | 930 Count | 781 Count | 0 Count | 4.21 VDC | 0.14 VDC |
| 1783149427 | 929 Count | 780 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1783149244 | 928 Count | 779 Count | 0 Count | 4.2 VDC | 0.14 VDC |
| 1783149061 | 927 Count | 778 Count | 0 Count | 4.16 VDC | 0.14 VDC |
| 1783148878 | 926 Count | 778 Count | 0 Count | 4.25 VDC | 0.14 VDC |
| 1783148695 | 925 Count | 777 Count | 0 Count | 4.17 VDC | 0.14 VDC |
| 1783148512 | 924 Count | 777 Count | 0 Count | 4.23 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)