This is the latest recevied telemetry packets stored in our database for station/object SP8AA-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780188444 | 127 Count | 448 Count | 42 Count | 4.15 VDC | 0.14 VDC |
| 1780188261 | 126 Count | 441 Count | 42 Count | 4.24 VDC | 0.14 VDC |
| 1780188078 | 125 Count | 434 Count | 42 Count | 4.22 VDC | 0.14 VDC |
| 1780187895 | 124 Count | 427 Count | 42 Count | 4.16 VDC | 0.14 VDC |
| 1780187713 | 123 Count | 420 Count | 42 Count | 4.21 VDC | 0.14 VDC |
| 1780187530 | 122 Count | 413 Count | 42 Count | 4.16 VDC | 0.14 VDC |
| 1780187347 | 121 Count | 406 Count | 42 Count | 4.23 VDC | 0.14 VDC |
| 1780187164 | 120 Count | 399 Count | 42 Count | 4.23 VDC | 0.14 VDC |
| 1780186981 | 119 Count | 392 Count | 42 Count | 4.21 VDC | 0.14 VDC |
| 1780186798 | 118 Count | 385 Count | 42 Count | 4.25 VDC | 0.14 VDC |
| 1780186615 | 117 Count | 378 Count | 42 Count | 4.19 VDC | 0.14 VDC |
| 1780186433 | 116 Count | 371 Count | 42 Count | 4.22 VDC | 0.14 VDC |
| 1780186250 | 115 Count | 364 Count | 42 Count | 4.22 VDC | 0.14 VDC |
| 1780186067 | 114 Count | 358 Count | 42 Count | 4.19 VDC | 0.14 VDC |
| 1780185884 | 113 Count | 351 Count | 42 Count | 4.23 VDC | 0.14 VDC |
| 1780185701 | 112 Count | 344 Count | 42 Count | 4.25 VDC | 0.14 VDC |
| 1780185518 | 111 Count | 337 Count | 42 Count | 4.25 VDC | 0.14 VDC |
| 1780185335 | 110 Count | 330 Count | 42 Count | 4.23 VDC | 0.14 VDC |
| 1780185153 | 109 Count | 324 Count | 42 Count | 4.19 VDC | 0.14 VDC |
| 1780184970 | 108 Count | 318 Count | 42 Count | 4.18 VDC | 0.14 VDC |
| 1780184787 | 107 Count | 313 Count | 42 Count | 4.15 VDC | 0.14 VDC |
| 1780184604 | 106 Count | 308 Count | 42 Count | 4.22 VDC | 0.14 VDC |
| 1780184421 | 105 Count | 301 Count | 42 Count | 4.15 VDC | 0.14 VDC |
| 1780184252 | 104 Count | 294 Count | 42 Count | 4.15 VDC | 0.14 VDC |
| 1780184055 | 103 Count | 287 Count | 42 Count | 4.26 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)