This is the latest recevied telemetry packets stored in our database for station/object F5MIW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792561219 | 271 Count | 931 Count | 238 Count | 0 VDC | 0 VDC |
| 1792557615 | 266 Count | 908 Count | 234 Count | 0 VDC | 0 VDC |
| 1792554011 | 262 Count | 886 Count | 231 Count | 0 VDC | 0 VDC |
| 1792550406 | 255 Count | 853 Count | 225 Count | 0 VDC | 0 VDC |
| 1792546827 | 248 Count | 825 Count | 219 Count | 0 VDC | 0 VDC |
| 1792543223 | 241 Count | 796 Count | 213 Count | 0 VDC | 0 VDC |
| 1792539618 | 234 Count | 765 Count | 207 Count | 0 VDC | 0 VDC |
| 1792536014 | 227 Count | 734 Count | 201 Count | 0 VDC | 0 VDC |
| 1792532410 | 220 Count | 702 Count | 195 Count | 0 VDC | 0 VDC |
| 1792528806 | 213 Count | 671 Count | 189 Count | 0 VDC | 0 VDC |
| 1792525226 | 206 Count | 641 Count | 183 Count | 0 VDC | 0 VDC |
| 1792521622 | 202 Count | 621 Count | 180 Count | 0 VDC | 0 VDC |
| 1792518018 | 195 Count | 595 Count | 174 Count | 0 VDC | 0 VDC |
| 1792514414 | 189 Count | 567 Count | 169 Count | 0 VDC | 0 VDC |
| 1792510809 | 183 Count | 545 Count | 164 Count | 0 VDC | 0 VDC |
| 1792507205 | 177 Count | 524 Count | 159 Count | 0 VDC | 0 VDC |
| 1792503626 | 175 Count | 505 Count | 158 Count | 0 VDC | 0 VDC |
| 1792500021 | 131 Count | 436 Count | 115 Count | 0 VDC | 0 VDC |
| 1792496417 | 126 Count | 420 Count | 111 Count | 0 VDC | 0 VDC |
| 1792492813 | 124 Count | 405 Count | 110 Count | 0 VDC | 0 VDC |
| 1792489209 | 118 Count | 387 Count | 105 Count | 0 VDC | 0 VDC |
| 1792485605 | 105 Count | 334 Count | 93 Count | 0 VDC | 0 VDC |
| 1792482025 | 83 Count | 291 Count | 72 Count | 0 VDC | 0 VDC |
| 1792478421 | 72 Count | 259 Count | 62 Count | 0 VDC | 0 VDC |
| 1792474817 | 65 Count | 236 Count | 56 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)